Milwaukee Tape Measure Magnetic Tip

See how the magnetic tip on a Milwaukee tape measure grabs steel and holds the hook end, plus tips on reading the blade when the magnet is in the way.

2 min read3 viewsMilwaukee Tape Measure Magnetic Tip
— · 0 votes
Contents
  1. What the magnet holds onto
  2. Keeping the reading accurate
  3. Care of a magnetized hook
  4. Questions About Milwaukee Magnetic Tape Tips
  5. Does a Milwaukee tape measure magnetic tip work on wood?
  6. Will the magnet affect the accuracy of the tape measure?
  7. Can a magnetic tip be added to an existing tape measure?
  8. What should I do if the magnet stops holding?

A Milwaukee tape measure magnetic tip is a magnetized hook end that clings to steel so the blade stays put while you measure alone. It holds the end against framing, conduit and steel studs without a second hand. The magnet sits at the hook, so it grips the edge of the material rather than sitting flat on the face.

What the magnet holds onto

The magnetic tip grips ferrous metal such as steel studs, pipe and metal framing. A magnetic hook end on a Milwaukee tape measure is meant for surfaces a magnet can attract, not for wood, drywall or concrete. On non-metal material the hook still catches an edge in the standard way. The magnet adds holding power only where steel is within reach of the tip.

Keeping the reading accurate

A magnetic tip changes how the blade sits against steel, so check where the magnet meets the surface. The hook end is designed to slide by its own thickness for inside and outside measurements. Steel can pull the tip slightly off the true edge, which shifts a reading. Press the hook flush before you trust the number on the blade.

Care of a magnetized hook

Metal shavings and filings collect on a magnetic tip and can blunt its grip over time. Wipe the hook after work near steel dust and store the tape so the tip does not pick up debris. A magnetized hook end can also disturb a compass or a sensitive device. Keep the tip away from items where magnetism causes a problem.

Questions About Milwaukee Magnetic Tape Tips

Does a Milwaukee tape measure magnetic tip work on wood?

A Milwaukee tape measure magnetic tip does not grip wood, because wood does not attract a magnet. The hook end still catches the edge of a board for a standard measurement. Use the magnet only where steel is present, and rely on the hook shape elsewhere.

Will the magnet affect the accuracy of the tape measure?

The magnet can affect accuracy if it pulls the hook end off the true edge of steel. A magnetic tip may sit slightly proud when it clings to a steel surface. Press the hook flat before reading the blade, and check the tip against the edge you measure from.

Can a magnetic tip be added to an existing tape measure?

A magnetic tip is built into the hook end of the tape and is not a part you swap onto another blade. Milwaukee sells tape measures with the magnet already fitted at the hook. Replacing a hook yourself can disturb the sliding allowance the blade depends on.

What should I do if the magnet stops holding?

A magnetic tip that stops holding often has metal dust packed onto it. Wipe the hook end clean and check for filings caught between the magnet and the steel. If the grip does not return, the magnetized hook may be worn and the tape needs service or replacement.

Read next

Latest articles