Painting Room Corners
Learn how to paint room corners cleanly: cut in with an angled brush, tape edges when needed, paint the wall-ceiling line, and estimate paint for corner walls.
Contents
Painting room corners cleanly means cutting in first, before the roller touches the wall. You load an angled brush lightly, draw a steady line where two walls meet or where a wall meets the ceiling, and keep the paint edge tight. The sections below cover brush choice, tape use, the wall-ceiling line, and how to estimate paint for corner walls.
Cut in before you roll
Corner cutting in sets the edge that the roller will follow, so the brush work comes first. Load an angled brush with a small amount of paint and tap off the excess on the rim of the container. Draw the line along the corner in one slow stroke, letting the bristles splay into the crease, then feather the wet edge outward. Roll the open wall while that edge is still wet so the two finishes blend.
Choose a brush for the wall corner
A corner brush or a two-inch angled brush reaches into a wall corner without loading the opposite surface. Angled bristles give you a straight edge along the crease and let you control where paint stops. Work from the top of the corner downward and keep the brush tip pointed into the join. Reload with less paint than feels natural, because a dry brush releases a cleaner line than a soaked one.
Tape edges and plan the paint
Painter's tape protects a trim edge or a wall-ceiling line, but press the tape edge firmly to stop paint bleeding under it. Masking corner edges works better on flat trim than in the seam where two walls meet, because tape cannot follow a crease. For paint amounts, estimate the wall area of each wall and divide by the coverage per gallon printed on the can. Multiply by the number of coats you plan, and add a margin for the corner cutting in.
Corner Painting Questions
How do I paint a corner where two walls meet?
Paint a corner where two walls meet by cutting in with an angled brush on one side, then on the other, before any rolling. Keep the brush stroke inside the crease so paint does not build up on the adjoining wall. Roll each wall toward the corner and stop just short of the wet brush line. If the two walls share a color, blend the roller passes while the paint is still wet.
How do I paint the corner between the wall and the ceiling?
The wall-ceiling line is best painted by cutting in along the ceiling edge with an angled brush before you roll the wall. Draw a straight line just below the ceiling and feather the paint down the wall. Painter's tape pressed firmly along the ceiling edge helps when your hand is unsteady. Paint the ceiling first if it also needs a coat, so any drip onto the wall is covered later.
Should I tape corners when painting?
Taping room corners is optional, and tape works best on straight edges such as trim rather than a wall crease. Press the tape edge down firmly so paint cannot creep under it, and pull the tape while the paint is still slightly soft. On a corner where two walls meet, an angled brush gives a tighter line than tape. Remove tape slowly at a low angle to avoid lifting the fresh paint.
How do I estimate paint for corner walls?
Estimate paint for corner walls by measuring the height and width of each wall and multiplying them for the wall area. Divide that total by the coverage per gallon on the label, then multiply by the number of coats. Corner cutting in uses extra paint in the brush, so keep a little spare. A room with deep color changes may need more than one container.