Corner Bench Seat With Storage: Choosing One

Learn how to choose a corner bench seat with storage: measure your corner, set the seat depth and height, and pick a lift-up lid that suits your room.

4 min read1 views
— · 0 votes
Contents
  1. Measure the corner footprint first
  2. Set bench depth and height
  3. Choose how the storage opens
  4. Questions About Corner Bench Storage
  5. What is a corner banquette seating with storage?
  6. What dimensions does a corner bench need?
  7. How deep and how high should a bench seat be?
  8. How does a lift-up lid work on a corner bench?

A corner bench seat with storage turns an awkward corner into a seat whose base holds folded blankets, games or table linen. Choosing one starts with the corner you have, since the seat footprint, the bench depth and height, and the way the under-seat storage opens all follow from that space. The notes below cover a built-in banquette, a freestanding corner bench storage unit, and a reading nook bench, so you can match the piece to the room rather than the other way round.

Measure the corner footprint first

A corner seating footprint is set by the two walls that meet, so measure each wall run and the floor area the seat will occupy before you shop. Corner bench dimensions combine the length along each wall with the depth of the seat, and the depth decides how far the bench reaches into the room. Leave room to move past the bench and to open any nearby doors. A drawn plan of the corner shows whether a built-in banquette or a freestanding storage bench fits better.

Set bench depth and height

Bench depth and height decide whether a corner bench seat is comfortable to sit on and to rise from. Seat depth suits a person when the back of the knee clears the front edge, and height suits when the feet rest flat on the floor. A deeper seat gives more room to curl up in a corner reading nook bench, while a shallower seat leaves more floor for walking. Match the seat height to the table where the bench will be used as dining room corner bench seating.

Choose how the storage opens

A bench seat storage compartment opens either through a lift-up seat or through drawers and doors, and each suits a different corner. A lift-up lid gives one deep under-seat storage box for bulky items, but it needs clear floor in front and a clear height above to raise. Drawers and doors give access to smaller items without lifting the whole seat and work where the bench sits under a window. A lift-up seat stays shut with a hinge or gas strut, and the fitting should hold the lid safely while you reach inside.

Questions About Corner Bench Storage

What is a corner banquette seating with storage?

A corner banquette seating with storage is a fixed or freestanding seat built into two meeting walls, with its base used as a compartment. The banquette storage lift-up seat gives a continuous box beneath the cushions, which suits bedding, board games or seasonal items. The seat back runs along both walls, so the bench fills a corner that would otherwise sit empty. Measure both wall runs and the seat depth before ordering a banquette.

What dimensions does a corner bench need?

Corner bench dimensions depend on the two wall runs it fills and the depth of the seat you want. Measure each wall from corner to the point where the bench should stop, then decide the seat depth by the clearance behind the knee. Seat height matters too, since a bench used at a dining table must sit lower than the tabletop. Record the height of any window or radiator the bench will pass under.

How deep and how high should a bench seat be?

Bench depth and height should let a seated person keep both feet flat and clear the front edge behind the knee. A deeper seat suits lounging and a corner reading nook bench, while a shallower seat frees floor space in a tight room. Set the height against the table it serves, because a seat that is too high or too low strains the back. Test a mock-up of the seat in cardboard before you commit to a built-in.

How does a lift-up lid work on a corner bench?

A lift-up lid opens on a hinge along the back edge of the seat, so the whole seat top rises and exposes the storage box beneath. A gas strut or stay holds the lid open while you load or reach into the bench storage unit. Clear floor in front and clear height above are needed to raise the seat without hitting a table or wall. Fit a stay that holds the lid safely, and have a trained joiner fit the hinge if you are unsure.

Read next

Latest articles