IKEA Corner Desk Dimensions by Model (BEKANT, MICKE, GALANT)
Measured dimensions for IKEA corner desks in the BEKANT, MICKE and GALANT lines, with width, depth, leg placement and how each shape fits a room corner.
Contents
- How IKEA corner desk dimensions work
- BEKANT corner desk dimensions
- MICKE corner desk dimensions
- GALANT corner desk dimensions
- Table for comparing the three corner shapes
- Checking the footprint against your room
- Leg configuration and under-desk clearance
- Desk top size and what it holds
- IKEA corner desk sizing questions
- What are the BEKANT corner desk dimensions?
- What are the GALANT corner desk dimensions?
- What are the MICKE corner desk dimensions?
- How do I measure an IKEA corner desk for my room?
- Does the leg configuration change the desk dimensions?
- Is an IKEA L-shaped desk the same as a corner desk?
IKEA corner desk dimensions differ by model and by how the frame is configured. A BEKANT corner desk is built from a corner top on an adjustable frame, a MICKE corner desk is a compact unit with a fixed footprint, and a GALANT corner desk is a modular system whose size depends on the combination of tops and legs you choose. Match the footprint to your corner before you commit to a layout.
- Read the corner desk dimensions as a footprint, not just a width, because the return depth decides how far the desk reaches into the room.
- The BEKANT line uses a fixed corner top shape on an adjustable underframe, so the height can be tuned but the plan size stays the same.
- The MICKE corner desk is a compact single-piece option suited to a small room with a shallow corner.
- GALANT is a modular system, so its overall size is the sum of the top you pick and where you set the legs.
- Leave clearance behind the corner for power access and room for a chair to swing without hitting the walls.
How IKEA corner desk dimensions work
An IKEA corner desk is measured by the plan footprint it covers, which means the overall width along both walls. The width is read on each wall from the corner to the outer edge, and the depth is the distance the desk reaches out from each wall.
Depth matters as much as width when you plan a corner. A deep return eats floor space and pushes the chair away from the wall, while a shallow return keeps the room open but limits monitor and lamp placement.
Each model also has a fixed leg configuration, so the frame position decides where the desk actually stands. Check the leg spread before you buy, because a leg that sits far from the corner changes how the desk frames the room.
BEKANT corner desk dimensions
A BEKANT corner desk comes as a corner top that sits on an adjustable frame, which sets the height you can tune to your seat. The plan size of the corner top is fixed, so width and depth stay the same whatever height you choose.
The BEKANT corner top is shaped to wrap the corner with a returning wing on one side, so the desk covers two walls. Measure the wall run on both sides of the corner before you place it, because the wing needs clear wall to sit against.
The adjustable frame lets you match the desk height to a chair and keeps the top level on an uneven floor. Confirm the height range of the frame you buy, since the BEKANT line includes different frame heights for sitting and standing setups.
MICKE corner desk dimensions
A MICKE corner desk is a compact unit that pairs a corner top with built-in storage, and its footprint is fixed by the unit itself. The plan shape is roughly L-shaped, and the storage section adds depth to one side of the return.
The MICKE corner desk suits a small room where a full-wall corner run would crowd the space. Its compact width means a smaller monitor or laptop sits better than a wide multi-screen layout.
Measure the doorway and stair path before you buy a MICKE corner desk. The unit arrives as one piece, so the route into the room needs to clear the packed footprint.
GALANT corner desk dimensions
A GALANT corner desk is part of a modular system, so its overall size is not one fixed number. The dimensions depend on the corner top you pick and the frame or leg combination you pair with it.
GALANT tops include corner sections that join to straight sections, which means the desk can run along one wall or wrap a longer run. Add the widths of the joined tops to get the full wall length the desk will occupy.
Leg placement changes the usable space under a GALANT desk. Set the legs where the frame supports the top, then check that your chair base and knees clear the legs when you sit at the corner.
Table for comparing the three corner shapes
A quick comparison helps you see what each line asks of a room, even before you look up a specific top size. The table below describes the shape and how the footprint is set, not the exact figures for every variant.
Treat the shape column as the first filter when you plan a corner. A fixed footprint model is easy to place, while a modular model gives you more room to match a wall run.
Write your wall lengths down before you compare, then check each model against the shorter wall of the corner. The shorter wall sets the limit for almost every corner layout.
| Model | Footprint type | What sets the size |
|---|---|---|
| BEKANT | Fixed corner top on an adjustable frame | The corner top you choose and the frame height |
| MICKE | Compact single unit with storage | The unit body and its built-in depth |
| GALANT | Modular tops on a separate frame | The tops you join and where you set the legs |
Checking the footprint against your room
Measure the corner of your room along both walls, then mark the desk footprint on the floor with tape. Tape shows the true plan size and reveals whether the chair clears the walls when it rolls back.
Keep the wall behind the desk clear for power outlets and cable routing. A desk pushed tight to the corner can block the socket you need for a monitor and lamp.
Account for the door swing and any built-in closet before you set a corner desk. A desk that fits the corner but blocks a door is a layout problem you cannot solve with a smaller monitor.
Leg configuration and under-desk clearance
The leg configuration sets where you can put your knees and your chair base. On a corner desk, the legs sit at the outer ends and along the return, so the clear zone is under the corner itself.
A center leg or a leg close to the inner corner reduces knee room and can stop a chair from rolling fully into the corner. Check the frame drawing before you commit to a desk size.
Height adjustment changes how the desk meets your body but not where the legs stand. Match the height to your chair first, then confirm the leg positions still suit the chair base.
Desk top size and what it holds
The desk top size decides how much you can keep on the surface, and the return depth tends to matter more than the long width. The wing holds a monitor or laptop, while the corner zone holds the keyboard and your hands.
A shallow return limits speakers, a printer or a second screen, so plan the equipment list before you choose a top. Depth on the return is the figure to check for larger items.
Cable trays and monitor arms need clearance under the top and along the frame. Confirm that the frame leaves room for a clamp mount before you plan a raised monitor.
IKEA corner desk sizing questions
What are the BEKANT corner desk dimensions?
A BEKANT corner desk is set by its corner top and the adjustable frame under it. The plan footprint is fixed by the top, while the height changes with the frame you choose. Check the specific top and frame pair together, because the BEKANT line includes more than one frame height.
What are the GALANT corner desk dimensions?
A GALANT corner desk has no single size, because the line is a modular system. Its dimensions come from the corner top you pick plus any straight tops you join to it, and from where you set the legs. Add the top widths together to get the full wall run the desk covers.
What are the MICKE corner desk dimensions?
A MICKE corner desk is a compact single unit with built-in storage, so its footprint is fixed by the unit itself. The plan shape is roughly L-shaped, and the storage section adds depth to one side. Measure the path into the room, because the unit arrives as one piece.
How do I measure an IKEA corner desk for my room?
Measure the corner along both walls from the corner point outward, then mark the desk footprint on the floor with tape. The shorter wall sets the limit for the layout. Check the door swing and any outlet behind the desk before you commit.
Does the leg configuration change the desk dimensions?
The leg configuration does not change the top size, but it does change where the desk stands and how much knee room you get. A leg near the inner corner can block a chair base from rolling into the corner. Check the frame drawing against your chair before you buy.
Is an IKEA L-shaped desk the same as a corner desk?
An IKEA L-shaped desk and a corner desk describe the same plan shape, with two runs that meet at an angle. The trade term L-shaped desk is used for both fixed corner tops and joined modular tops. The difference is whether the footprint is fixed by one top or built from several.