How to Draw Stairs and Steps on a Floor Plan

Learn how to draw stairs and steps on a floor plan with clear stair symbols, tread and riser lines, break lines and up arrows that show direction.

3 min read2 viewsHow to Draw Stairs and Steps on a Floor Plan
— · 0 votes
Contents
  1. Set the stair run and width
  2. Draw tread and riser lines
  3. Add break lines and arrows
  4. Questions about stair plan symbols
  5. How do you draw steps on a floor plan?
  6. What is the architectural drawing symbol for stairs?
  7. Where does the up arrow go on a stair symbol?
  8. How wide should a stair be on a floor plan?

Drawing stairs and steps on a floor plan means turning a real flight into a simple symbol that shows where it starts, where it goes and how wide it is. You mark the stair run with evenly spaced tread and riser lines, cut it with a break line and point an arrow in the up direction. The result reads clearly to anyone who uses the plan to plan a room or a building.

Set the stair run and width

A stair run is the horizontal distance a flight covers from the first step to the last on one level. Measure that run and the stair width, then draw a rectangle at the same scale as the rest of the floor plan. The rectangle sits exactly where the flight passes through the floor. Labeling the width keeps the plan useful when someone checks circulation later.

Draw tread and riser lines

Each step appears as a line across the stair width, spaced to match the tread depth at the plan scale. Those tread and riser lines are evenly spaced so the symbol looks regular and the count of steps can be read. A line marks the nosing edge of a tread, which is where a foot lands. Keep the spacing consistent or the drawn stair will mislead anyone measuring from it.

Add break lines and arrows

A stair break line is a zigzag cut through the flight that shows the stair continues above the floor cut line. Place it partway along the run so the symbol stays short without losing the direction of travel. An up arrow sits along the center of the run and points toward the top of the flight. The down direction is then read automatically, and no second arrow is needed.

Questions about stair plan symbols

How do you draw steps on a floor plan?

Steps are drawn as a rectangle the width of the stair with a line across it for each tread edge. Space the lines at the tread depth converted to the drawing scale, then add an arrow along the run. Steps that step up a level rather than a full flight follow the same pattern but with fewer lines.

What is the architectural drawing symbol for stairs?

The architectural stair symbol is a rectangle with parallel tread and riser lines, a break line and an arrow showing the up direction. Floor plan symbols vary by office, so the training standard of the drawing set decides the exact style. The arrow and the parallel lines are the parts readers rely on.

Where does the up arrow go on a stair symbol?

The up arrow runs along the middle of the stair width and points in the direction a person walks upward. Place it so the tail starts near the bottom step and the head reaches the top of the flight. When a plan shows several floors, label the arrow with the level it leads to.

How wide should a stair be on a floor plan?

Stair width on a plan is set by the building code that applies to the project and by how many people use the stair. Those rules differ by place, so the designer takes the figure from the local code rather than from the drawing symbol. Draw the measured width to scale and note the dimension on the plan.

Latest articles