How to Build a Bay Window Seat With Storage
Plan and build a bay window seat with storage: measure the angled seat base, set window seat dimensions, frame lift-up lids and fit a bay window cushion.
Contents
- Measure the bay before cutting anything
- Frame the base and plan the openings
- Choose the lid and cushion setup
- Questions about bay window seat storage
- How deep should a bay window seat be?
- Can I put a lift-up lid on an angled bench?
- What holds the lid open while I reach inside?
- How do I make a cushion for an angled seat?
Building a bay window seat with storage starts with measuring the bay from the deepest point of each wall, then framing a base that follows the angles and opens with a lift-up lid. The project combines a bench frame, hinged seat base panels and a fitted bay window cushion, so the work divides into measuring, framing, hinging and upholstering. Getting the frame square to the room and level along the window wall matters more than any decorative finish.
Measure the bay before cutting anything
A bay window seat is a set of angled boxes, not one rectangle, so you mark the depth at the center and at each side wall. Window seat dimensions of about 18 to 20 inches to the top of the cushion suit sitting, with a deeper base if you want to hide large items. Check that the front edge leaves enough floor for your legs to tuck under. Write the three or five wall lengths down and transfer them to a simple plan on paper.
Frame the base and plan the openings
Build the seat base as a face frame of vertical panels joined by horizontal rails, with the front divided into bays between the angles. Seat base panels become the doors or lids, and each one needs a frame member behind its edges so the hinges have solid wood to bite into. Fit a vertical divider at every hinge line so the lid cannot rack. Leave a small gap at each lid edge so the wood can move with the seasons.
Choose the lid and cushion setup
A lift-up lid works when you want the whole seat top to open, and a hinged front panel works when you want access without lifting the cushion. Gas struts or a prop stick hold a lift-up lid open while you reach inside. A bay window cushion cut to the seat outline softens the bench and hides the lid seams, so cut the cushion template before you finish the top. Foam density and thickness decide how the cushion feels, and the cover needs a way to open for cleaning.
Questions about bay window seat storage
How deep should a bay window seat be?
A bay window seat is typically 18 to 20 inches deep from the front edge to the back wall at seating height, plus a cushion of 2 to 3 inches. Deeper bases give more storage, but the front edge then sits far from the window and the seat becomes hard to reach. Measure the deepest point of the bay and keep the seat outline inside it.
Can I put a lift-up lid on an angled bench?
A lift-up lid works on an angled bay window bench when the seat top is built as separate panels that follow each wall angle. Each panel needs its own frame opening and a hinge line fixed to a solid rail behind it. A single wide lid across the angles tends to bind, so divide the top into two or three panels.
What holds the lid open while I reach inside?
A gas strut or a folding prop stick holds a lift-up lid open on a bay window seat with storage. The strut screws to the inside of the lid and to a side panel, and its rating must match the weight of the lid and cushion. A prop stick is simpler and has no moving parts to fail.
How do I make a cushion for an angled seat?
A bay window cushion is made from a paper or cardboard template traced along the seat outline, including each angle. The template goes to the foam cutter, and the cover is sewn to the same shape with a zip or flap for removal. Foam of 2 to 4 inches thick keeps the seat comfortable without hiding the lid edges.