Door Clearance Requirements in Australia
Learn how door clearance requirements in Australia shape a home layout, from door swing space and frame widths to step-free access along a route.
Contents
- Door swing and the space it takes
- Clearance in front of and behind the door
- Frame width and passing room
- Door Clearance Questions for Home Layouts
- What are the door clearance requirements in Australia for a home?
- How much space should I leave for a door swing when placing furniture?
- What door width does AS 1428 require for accessible access?
- Does a wider door reduce the space I have for furniture?
Door clearance requirements in Australia set the space a door leaf, its frame and a person passing through all need, and they shape what furniture can stand where. The National Construction Code and Australian Standards guide these clearances, while accessible routes follow AS 1428 rules for step-free access. This page explains the clearances that matter when you draw a floor plan and place furniture.
Door swing and the space it takes
A hinged door sweeps a quarter-circle of floor that must stay free of furniture and rugs. That arc equals the door width from the hinge side, so a wide leaf needs more clear floor inside the room. Draw the swing arc on the plan before you place a sofa, a wardrobe or a bed nearby. A door that opens against a wall frees more usable space than one that opens into the middle of a room.
Clearance in front of and behind the door
The approach space on the handle side lets a person reach and pull the door open with room to stand. Keep the floor clear on both sides of the opening, not only where the leaf swings. Furniture pushed against an opening blocks the handle and turns a wide door into a tight gap. Allow extra room at doors that sit at the end of a corridor or beside a return wall.
Frame width and passing room
The clear opening is measured between the inside faces of the frame, not the rough opening in the wall. Trims, stops and a thick door leaf all reduce the width a person or a piece of furniture can pass through. When you plan a route for moving a mattress or a cabinet, compare its size with the clear opening plus the turn space beyond. Accessible routes under AS 1428 need a wider clear opening and level thresholds for step-free movement.
Door Clearance Questions for Home Layouts
What are the door clearance requirements in Australia for a home?
Door clearance requirements in Australia combine the National Construction Code and Australian Standards, which set minimum clear openings and the free space a door needs to swing. The exact figure depends on the door type, its location and whether the route must be step-free. Check the current code edition and your local building authority before you finalize a plan.
How much space should I leave for a door swing when placing furniture?
Leave the full quarter-circle of the door swing clear, measured from the hinge side across the door width. Also keep the approach side free so a person can stand and reach the handle. Mark the swing arc on your layout drawing first, then place furniture outside it.
What door width does AS 1428 require for accessible access?
AS 1428 sets a clear opening width for accessible doorways that is wider than a typical internal door, and it also covers thresholds and approach space. The clear width is measured between the frame faces and can be reduced by stops and hardware. A trained access consultant should confirm the figure for your project.
Does a wider door reduce the space I have for furniture?
A wider door needs a larger swing arc and more approach room, which reduces floor space for furniture near the opening. You can reclaim space by choosing a door that swings against a wall or a sliding door that needs no arc. Plan the door first and fit the furniture around the free floor it leaves.