Cable Cutters for Electrical Work
Learn how electrical cable cutters differ from wire cutters, how cutting capacity is rated, and how to cut copper cable safely and cleanly.
Contents
- How cable cutters differ from wire cutters
- Matching cutting capacity to cable diameter
- Cutting electrical cable safely
- Questions about electrical cable cutters
- Can I use wire cutters to cut electrical cable?
- Do cable cutters work on steel or armored cable?
- When are ratchet cable cutters worth using?
- How do I get a clean cut on copper cable?
Cable cutters for electrical work are hand tools with curved jaws that shear cable without crushing it. A round, clean cut lets the conductor slide into a terminal or connector without flattened strands. The page explains how these cutters differ from wire cutters and how to match one to cable size. Safe use around lighting circuits, from fixture swaps to rewiring, is covered as well.
How cable cutters differ from wire cutters
Cable cutters differ from wire cutters in jaw shape and in the thickness of conductor they handle. Wire cutters, also called diagonal cutters, have short pointed jaws meant for thin wire and small conductors. Cable cutters use long, curved blades that wrap around the cable and shear it in a single stroke. Forcing diagonal cutters through thick cable can nick the blades and leave a pinched, uneven end.
Matching cutting capacity to cable diameter
The cutting capacity of a cable cutter is the largest cable diameter its jaws can shear cleanly. Manufacturers state capacity as a maximum diameter or cross-section, and the rating depends on the conductor metal. Compact cutters with long handles suit the smaller cables found in lighting and outlet circuits. Ratchet cable cutters close in steps, which lets you cut thicker copper cable with less hand force.
Cutting electrical cable safely
Cutting electrical cable safely starts with switching off the circuit and confirming it is dead. Check the cable with a voltage tester, then confirm the tester works on a known live source. Insulated cutters rated for live work add protection, but they do not make cutting live cable safe. New circuits and changes to fixed wiring call for a qualified electrician.
Questions about electrical cable cutters
Can I use wire cutters to cut electrical cable?
Yes, wire cutters can cut thin electrical wire, but they struggle with larger multi-conductor cable. Their short jaws need several bites on a thick cable, which leaves a ragged, squashed end. A crushed conductor is harder to strip and may not seat fully in a terminal.
Do cable cutters work on steel or armored cable?
No, standard cable cutters are made for copper and aluminum, not steel wire or armor. Hard steel strands can chip or dent the blades of a cutter built for soft metals. Cable with a steel core or steel wire armor needs a cutter whose maker rates it for steel.
When are ratchet cable cutters worth using?
Ratchet cable cutters are worth using when the cable is too thick to cut with one squeeze. A ratchet is a gear and pawl that holds the jaws closed between pumps of the handle. Each pump advances the blades a little, so the cut needs less force but more strokes. For the smaller cables in lighting circuits, a non-ratcheting cutter is quicker to use.
How do I get a clean cut on copper cable?
A clean cut on copper cable comes from sharp blades and a cutter sized for the cable. Place the cable deep in the jaws, square to the blades, and close them in one motion. Twisting the tool during the cut pulls strands out of shape and bends the blade edges. A cutter whose jaws no longer meet tends to flatten the cable instead of shearing it.