Wire Strippers: How to Choose the Right Pair

Learn how to choose wire strippers by matching the tool type and gauge range to the wire you strip, so insulation comes off clean without nicking the copper.

3 min read1 viewsWire Strippers: How to Choose the Right Pair
— · 0 votes
Contents
  1. Match the tool type to the work
  2. Check the gauge range first
  3. Look at the jaws and the extras
  4. Questions about choosing wire strippers
  5. How do I choose wire strippers for my wire sizes?
  6. What is the difference between automatic and manual wire strippers?
  7. Can wire strippers cut wire as well as strip it?
  8. What should I check before stripping live wire?

Wire strippers are hand tools that remove insulation from electrical wire without cutting the copper conductor, and choosing the right pair comes down to tool type, gauge range and the jaws you use. The right pair matches the wire sizes in your work and gives you a clean strip on every conductor. This page explains the tool types, the buying criteria that matter and the safety points to check before you buy.

Match the tool type to the work

Wire stripper types fall into a few families, and each suits a different kind of stripping. Manual strippers with sized notches cut insulation when you close the handles around the wire. Automatic wire strippers grip, strip and often pull the insulation away in one squeeze. Self-adjusting strippers sense the conductor and set themselves, which helps when you move between wire sizes often.

Check the gauge range first

The gauge range tells you which wire sizes a pair of strippers can handle, and it is the first specification to check. A tool sized for small control wire will not strip a thick feeder cleanly, and an oversized tool can crush small conductors. Look for a range that covers every wire size in your work with a little room on each side.

Look at the jaws and the extras

Cutting and stripping jaws do different jobs, and a good pair keeps them separate so one action does not damage the other. Serrated gripping jaws hold the wire steady while the stripping notch removes insulation. Many pairs add a wire cutter and screw cutter, which saves switching tools during lighting work. Check that the handles insulate the grip and that the tool locks closed for storage.

Questions about choosing wire strippers

How do I choose wire strippers for my wire sizes?

Choose wire strippers whose gauge range covers every wire size you expect to strip. Read the range marked on the tool or in its specifications and compare it with the wire you use. A pair that covers your sizes with a little margin strips cleanly on each conductor. Buy a second pair for very small or very large wire rather than forcing one tool.

What is the difference between automatic and manual wire strippers?

Automatic wire strippers grip and strip the wire in one squeeze, while manual strippers rely on you to seat the wire in the correct notch. Automatic and self-adjusting strippers reduce the guesswork when you move between sizes. Manual strippers give direct control and cost less, but you must match the notch to the wire. Both types remove insulation without cutting the conductor when used correctly.

Can wire strippers cut wire as well as strip it?

Many wire strippers include a cutting jaw, so the same tool cuts and strips wire. The cutter is sized for the wire range of the tool and is not a substitute for a dedicated side cutter on hard or thick conductors. Use the cutting jaw for light trimming and keep the stripping notch for insulation. Check the tool before buying if cutting is part of your routine.

What should I check before stripping live wire?

Wire strippers do not make a circuit safe, so switch off and verify that the circuit is dead before you strip any conductor. Insulated handles protect against accidental contact but do not replace lockout and testing. Work on de-energized wire, and call a qualified electrician for anything you are unsure about. A trained specialist should handle service panels and unfamiliar wiring.

Read next

Latest articles