Zippers for Cushion and Pillow Covers: Types and Choice
Learn which zipper types suit cushion and pillow covers, how zip length relates to cushion size, and what to check when you replace a zippered cover.
Contents
- Invisible and coil zippers in seams
- Matching zip length to cushion size
- Zipper weight and tape for wear
- Questions about cushion and pillow zippers
- What are the best zips for cushion covers?
- Can I replace a zipper on a zippered cushion cover?
- What zip length do I need for a cushion?
- Are zippers for pillow covers different from cushion zippers?
Zippers for cushion and pillow covers come in a few types, and the right one depends on where the opening sits and how the cover is washed. A hidden coil zipper sewn into a seam gives a clean edge, while a visible zipper suits a closure meant to be seen. The choice also covers zip length for cushion size, zipper weight and tape, and how to handle replacement zippered cushion covers.
Invisible and coil zippers in seams
An invisible zipper is a coil zipper with the teeth set behind the tape so they disappear once the seam closes. The coil itself is a continuous spiral of plastic or nylon that flexes around a stuffed cushion. Sew this type into a seam at the back or side of the cover, and the tape hides inside the seam allowance. Press the seam open before you stitch so the coil sits flat.
Matching zip length to cushion size
Zip length for cushion size should leave an opening wide enough to remove the insert without strain. A zipper shorter than the cushion edge forces you to fold the insert, which stresses the tape and the seam. Measure the finished cover edge where the zip will sit, then choose a zipper that spans most of that edge. A longer zip can be shortened by hand, but a short one cannot be lengthened.
Zipper weight and tape for wear
Zipper weight and tape decide how the closure holds up on a cushion that gets daily use. A heavier coil and a firm woven tape resist pulling at the ends better than a light dress zip. Tape width matters too, because a narrow tape gives little room for stitching and can pull out of the seam. Match the weight to the fabric, using a sturdier zip on upholstery-weight covers.
Questions about cushion and pillow zippers
What are the best zips for cushion covers?
No single zip suits every cushion cover, because the best choice depends on the seam and the fabric. An invisible coil zip gives a hidden closure in a seam, while a heavier coil zip suits a cover that is removed often. Choose by where the opening sits and how much strain the closure takes.
Can I replace a zipper on a zippered cushion cover?
Yes, a worn zipper on a zippered cushion cover can be replaced without remaking the whole cover. Open the seam that holds the old tape, remove the zip, and stitch a new one of the same length into the opening. Check that the new tape matches the seam allowance before you sew.
What zip length do I need for a cushion?
The zip length for a cushion depends on the edge where the opening sits, not on the cushion's diagonal. Measure the finished seam line and pick a zip that spans most of it so the insert slides out easily. A zip that is too short makes removal tight and strains the ends.
Are zippers for pillow covers different from cushion zippers?
Zippers for pillow covers follow the same rules as cushion zippers, with the size of the insert setting the difference. A small pillow takes a light coil zip and narrow tape, while a large floor cushion needs a heavier coil and wider tape. Match weight and length to the insert rather than to the label on the pack.