Wood vs Metal Outdoor and Patio Furniture: Which to Choose
Compare wood and metal outdoor and patio furniture by weather exposure, frame weight, care, and comfort so you pick the material that suits your space and routine.
Contents
- Start with how the space is used
- Wood outdoor furniture and its care
- Metal outdoor furniture and its strengths
- Compare wood and metal side by side
- Match the material to your climate
- Check joints, finishes, and comfort
- Care routines for each material
- Wood and metal patio furniture questions
- Is wood or metal better for outdoor furniture?
- Does metal patio furniture rust in the rain?
- How do I keep wooden garden furniture from graying?
- Which is lighter to move, wood or metal patio furniture?
- Can wood and metal outdoor furniture mix on one patio?
Wood outdoor furniture suits a sheltered patio and a slower care routine, while metal outdoor furniture handles open exposure and frequent rearranging with less fuss. The right pick follows your weather, your storage space, and how much upkeep you accept. Choose the frame material first, then the piece.
- Wood frames feel warmer and slightly softer to sit on, but they need periodic sealing or oiling.
- Powder-coated steel and aluminum resist rain well, and aluminum stays lighter to move.
- Match the material to wind, sun, salt air, and whether the furniture stays out all year.
- Check joints, welts, and drainage points before you buy any outdoor frame.
- Furniture that stays outdoors needs covers or indoor storage in harsh seasons, whatever the material.
Start with how the space is used
Patio furniture choice begins with how the piece will live outdoors, not with a style photo. A sheltered porch with a roof keeps wood dry enough to last through years of normal use. An open deck takes rain, wind, and strong sun on every side.
Think about moving the furniture. Metal frames in aluminum are light enough for one person to shift before a storm. Solid hardwood frames are heavier and tend to stay where you set them, which suits a dining set that rarely moves.
Consider the floor beneath. Metal legs can mark soft decking when dragged, so add glides or lift the piece. Wood legs sit more gently but may leave tannin stains on pale stone after a wet season, so check drainage under pots and planters nearby.
Wood outdoor furniture and its care
Wood gives patio furniture a warm look and a slightly forgiving seat that does not feel cold in the morning. Teak and other dense hardwoods hold up in weather because their natural oils resist moisture. Softer woods need more frequent attention and a protective finish.
Weather exposure drives how much care wood needs. Left bare, teak turns a silver gray, which some owners like and others do not. An oil or sealer keeps the original tone but must be reapplied as the surface drinks it in. UV damage shows as graying and small surface cracks over time.
Check the joinery before you buy. Mortise-and-tenon joints and stainless or brass fittings last longer outdoors than plain screws. Wood expands and contracts with humidity, so a frame with sound joinery and room to move will hold together through wet and dry seasons.
- Teak: dense, oily, good in rain, grays if left bare
- Eucalyptus: hard and affordable, needs regular oiling
- Acacia: sturdy and warm-toned, seal it yearly
- Cedar: light and rot-resistant, softer surface
- Pine: budget option, needs paint or a strong finish
Metal outdoor furniture and its strengths
Metal frames suit open patios where rain and sun hit the furniture directly. Powder-coated steel and aluminum resist moisture and hold a clean line. The coating shields the metal, and chips are the main risk because exposed metal can start to rust.
Aluminum is the lighter choice and does not rust, so it handles salt air and damp gardens well. Steel is heavier and more rigid, which suits a table that should not shift. Rust resistance depends on the coating quality and on keeping scratches sealed with touch-up paint.
Metal feels firmer and cooler to sit on than wood, so pair it with cushions that can be stored. Wrought iron and cast aluminum carry decorative detail but add weight. Sun heats dark metal in direct light, so a light finish stays cooler to the touch.
Compare wood and metal side by side
The two materials differ most in weight, care, and how they handle weather. Wood rewards shelter and regular oiling with a softer feel and a natural look. Metal rewards a sound coating with low routine care and easy moving.
Neither material wins everywhere. A coastal garden with salt spray suits aluminum, while a covered porch with afternoon shade suits teak. Cold winters push both materials toward storage, because freeze and thaw cycles stress joints and finishes.
Budget shapes the decision too, but the cost depends on the wood species or the coating quality rather than the material label. Look at the frame thickness and the fittings, because a thin frame in either material will fail before its finish does.
| Factor | Wood | Metal |
|---|---|---|
| Weight | Heavier, stays put | Lighter in aluminum |
| Rain | Needs oil or sealer | Coating resists, chips rust |
| Sun | Grays and dries | Dark finishes heat up |
| Care | Oiling and sanding | Touch-up paint and cleaning |
| Feel | Warmer, softer | Firmer, cooler |
Match the material to your climate
Weather exposure decides which frame survives best on your patio. Wet, humid gardens favor aluminum and powder-coated steel, because both shed water and dry quickly. Dry, sunny climates suit wood, though strong UV still fades a finish over time.
Salt air near the coast attacks steel and plain iron, so aluminum or a well-coated frame is the safer route. Windy sites punish light tables and chairs, and weighted feet or a heavier frame keep a set from tipping. Snow load and freezing nights stress both materials, so plan storage.
Cover the furniture or move it inside when the season turns harsh. Covers that trap moisture can damage wood, so use a breathable cover with vents. Metal frames left under a wet cover may corrode at the joints where water pools.
Check joints, finishes, and comfort
A good outdoor frame shows sound joints and a finish that covers every edge. Welds on a metal frame should be smooth and fully coated, with no bare spots. Wood joints should sit tight, and any screw holes should be sealed against water.
Test the seat and back for comfort before you commit. Wood arms and backs feel warm to the skin, while metal arms can feel cold and sharp at the edges. Cushions soften either frame, and removable covers are easier to clean and store.
Drainage matters on both materials. Metal frames collect water in hollow tubes, so look for drain holes or open ends. Wood seats should have gaps between slats so rain runs off, and any flat surface needs a slight pitch to avoid pooling.
Care routines for each material
Wood care centers on cleaning and replacing the finish before damage sets in. Wash the surface with mild soap, let it dry, and sand light marks before oiling or sealing. Reapply the finish when water stops beading on the surface.
Metal care centers on keeping the coating intact. Wipe off dirt and salt with fresh water, dry the frame, and touch up chips with matching paint. Rust spots on steel need the loose material removed and the area sealed before it spreads.
Store or cover both materials in the off-season where winters are harsh. Tighten bolts on metal frames and check wood joints for looseness after a wet season. A small repair early protects the whole frame.
Wood and metal patio furniture questions
Is wood or metal better for outdoor furniture?
Neither material is better for every patio, because the right pick depends on exposure and care. Wood suits sheltered spaces where you accept periodic oiling, and metal suits open patios where a sound coating keeps rust at bay. Weigh weight, weather, and finish care before you choose.
Does metal patio furniture rust in the rain?
Powder-coated steel resists rain while its coating stays intact, and aluminum does not rust at all. Chipped paint on steel exposes the metal, and that spot can corrode. Touch up bare spots and dry joints where water collects.
How do I keep wooden garden furniture from graying?
Wood grays when UV light and moisture break down its surface oils, so a sealer or oil slows the change. Clean the frame, sand light marks, and reapply the finish when water no longer beads. Teak left bare grays evenly, and some owners prefer that look.
Which is lighter to move, wood or metal patio furniture?
Aluminum frames are lighter than solid hardwood frames and shift easily for one person. Steel and cast aluminum add weight, and dense hardwoods stay put. Choose a lighter frame if you rearrange the patio often or store the set indoors.
Can wood and metal outdoor furniture mix on one patio?
Mixing wood and metal on one patio works when the tones and finishes relate to each other. A wood table with metal chairs or a metal frame with wood arms can look intentional. Keep the hardware outdoors-rated so the two materials age well together.