Under Cabinet Light Sizes and Lengths

Learn how under cabinet light sizes and lengths are measured, how bar length and strip width relate to cabinet width, and how to plan coverage for your counter.

3 min read1 views
— · 0 votes
Contents
  1. Measuring the cabinet and the mounting space
  2. Bar length, strip width and coverage
  3. Fixture diameter and clearance under a cabinet
  4. Questions About Under Cabinet Light Sizes
  5. How do I choose under cabinet light sizes for my cabinets?
  6. Should a light bar be as long as the cabinet?
  7. What does strip width mean for an LED strip light?
  8. How much space do I need under the cabinet for the light?

Under cabinet light sizes and lengths come down to matching the fixture to the cabinet run: the length of the bar or strip sets the coverage on the counter, the width and diameter set the mounting space, and the cabinet width sets the limit for both. The page explains how each measurement is taken and how to choose a size that lights the work surface without overhanging the cabinet.

Measuring the cabinet and the mounting space

Start the measurement at the cabinet width, taken under the shelf from one side panel to the other. The mounting space is the flat surface behind the front edge where a fixture can sit without blocking the door swing. A recessed bottom or a thick face frame reduces that space, so check the depth before you pick a bar length. Light fixtures need a flat surface and clearance for their cable and connection point.

Bar length, strip width and coverage

A rigid bar light is sold in fixed lengths, and the light length should stay within the cabinet width it serves. A strip light is sold as a roll and cut to length, with the strip width set by the tape, not by the cabinet. Coverage describes the pool of light on the counter, and it grows with the length and the output of the fixture. Joining two short bars is a way to cover a long run while keeping short pieces under each cabinet.

Fixture diameter and clearance under a cabinet

Puck lights and other round fixtures are sized by fixture diameter, and that dimension controls the hole or the base plate under the shelf. A wider diameter spreads light over a larger area but needs more headroom below the cabinet. Thin bars and strips take less vertical clearance, which matters over a shallow counter or a deep sink. Match the diameter to the space you have before you drill or screw anything.

Questions About Under Cabinet Light Sizes

How do I choose under cabinet light sizes for my cabinets?

Choose under cabinet light sizes by measuring each cabinet width and the depth of the mounting space behind the front edge. Pick a bar length that fits inside that width and leave room for the cable connection. Check the clearance below the cabinet so the fixture does not hang into the work area. Round fixtures also need their diameter to fit the base plate.

Should a light bar be as long as the cabinet?

A light bar can run close to the cabinet width, but it should not extend past the side panels. Leaving a small margin at each end keeps the light under the cabinet and out of sight from the room. A shorter bar centered on the cabinet gives a more even spread down the counter. For a long run, use several bars instead of one oversized fixture.

What does strip width mean for an LED strip light?

Strip width is the measurement across the tape, and it depends on the product rather than on the cabinet. A wider strip can hold more components and fit a stronger channel, while a narrow strip tucks into a slim channel. The strip length is cut to the cabinet run, so width and length are separate decisions. Choose the strip width that fits the channel and the mounting space you have.

How much space do I need under the cabinet for the light?

The space you need under the cabinet depends on the profile of the fixture and how it is mounted. A flat bar or a strip in a shallow channel needs little vertical clearance. A round puck light needs more room because its diameter sits below the shelf. Leave clearance for the cable and keep the light clear of the door swing.

Latest articles