Tile Volume Calculator: Working Out Tile Volume
Learn how a tile volume calculator works out tile volume from length, width and thickness, and see the formula you can apply yourself with simple measurements.
Contents
- The tile volume formula in steps
- Why tile thickness changes the result
- What a volume figure is used for
- Questions about tile volume calculations
- How does a tile volume calculator work?
- What unit should I measure tile thickness in?
- Can I use tile volume to work out how many tiles I need?
- Does tile thickness affect the volume much?
A tile volume calculator multiplies the length, width and thickness of a tile to give its volume in cubic units. The page explains the tile volume formula in plain terms, shows how tile thickness and the cubic measurement of tile relate, and covers what the result is good for and what it leaves out. You can use it to size a single tile or to add up the volume of many pieces for a project.
The tile volume formula in steps
Tile volume comes from three measurements taken in the same unit: tile length, width and height. Multiply length by width to get the face area, then multiply that area by the thickness you measured. A tile 300 millimeters long, 300 millimeters wide and 10 millimeters thick gives 900,000 cubic millimeters, which converts to 900 cubic centimeters. Convert every figure to one unit before you multiply, or the result will not mean anything.
Why tile thickness changes the result
Tile thickness is the measurement that shifts tile volume the most when the face size stays the same. A thicker tile of identical length and width holds more material, so its cubic measurement of tile rises in direct proportion to the thickness. Measure thickness with a caliper or a straight edge and ruler across the flat face, not at a raised edge or a bevel. Record the reading in the same unit as the length and width before you calculate.
What a volume figure is used for
Volume of a tile tells you how much material the piece contains, which matters for weight, packing and shipping estimates. A single tile volume multiplied by the number of tiles in a box gives the total volume of the box, and the same total helps compare storage needs. Tile volume does not tell you how many tiles cover a floor, because coverage depends on face area rather than cubic size. Use the volume result for material and transport planning, and use area for coverage.
Questions about tile volume calculations
How does a tile volume calculator work?
A tile volume calculator takes the length, width and thickness you enter and multiplies them together. The tool first converts your measurements to one unit, then returns the volume in cubic units of your choice. You supply the tile dimensions and the calculator handles the multiplication and unit conversion for you.
What unit should I measure tile thickness in?
Tile thickness should be measured in the same unit as the length and width of the tile. Mixing millimeters for thickness with meters for length gives a volume figure that is wrong by a large factor. Convert all three measurements to one unit first, then multiply them to get a valid cubic measurement of tile.
Can I use tile volume to work out how many tiles I need?
Tile volume does not tell you how many tiles cover a floor or wall. Coverage depends on the face area of each tile, which is length multiplied by width, plus a margin for cuts and breaks. Volume answers a different question about the material inside the tile, so use area for tile counts and volume for weight and transport.
Does tile thickness affect the volume much?
Tile thickness affects volume in direct proportion, so doubling the thickness doubles the volume of a tile with the same face size. A small change in thickness changes the volume by the same percentage. Measure thickness carefully, because an error there carries straight into the final cubic figure.