Measuring Light Levels for Desk Placement
How to read light levels at desk height with a lux meter, judge window glare on a screen, and pick a task lighting position before you move furniture.
Contents
- Reading a lux meter at desk height
- Where to measure before moving furniture
- Window glare and screen contrast
- Questions on desk light measurement
- What light level should a desk have?
- Where should task lighting sit on a desk?
- Can I use a phone app instead of a lux meter?
- Should I measure light before moving the desk?
Measuring light levels for desk placement means reading illuminance at the height and spot where the work will happen, not at the window or ceiling. A lux meter held flat on the desk surface shows the light a seated person actually receives. Take readings before moving furniture so you can compare candidate spots by measurement. The reading also tells you where glare and screen contrast need fixing.
Reading a lux meter at desk height
A lux meter converts light falling on its sensor into illuminance, the amount of light per unit area. Place the sensor flat on the desk surface at the spot where your hands and paper sit, facing upward. Keep your body out of the light path so your shadow does not fall on the sensor. Note the desk surface illuminance at the start, middle and end of the day, since daylight shifts.
Where to measure before moving furniture
Measuring before moving furniture means testing each candidate corner with the same meter and the same routine. Set the meter at seated eye height for screen tasks and at desk height for paper tasks. Compare the readings across the room, then look at what sits between each spot and the window. A spot close to glass can read high yet still be unusable because of glare.
Window glare and screen contrast
Window glare and screen contrast decide whether a well-lit desk is actually comfortable. A bright window behind or in front of a monitor pulls the eye between two very different brightness levels. Turn the desk so the window sits to the side of the screen, and check the contrast by eye at the seated position. Blinds or a diffusing shade help when the window cannot move.
Questions on desk light measurement
What light level should a desk have?
A desk light level depends on the task, the surface and the person doing it. Paper work needs more illuminance than screen work, and a dark desk surface absorbs more light than a pale one. Read the meter at the desk surface and adjust with task lighting rather than guessing. Local rules or standards set figures for workplaces, so check those where they apply.
Where should task lighting sit on a desk?
Task lighting sits to the side of your working hand, angled across the desk so it lights the paper without shining into your eyes. A right-handed writer places the lamp on the left, and a left-handed writer mirrors that. Keep the lamp head below eye level to reduce glare on the screen. The lamp supplements daylight, so measure the combined result at the desk surface.
Can I use a phone app instead of a lux meter?
A phone light app can give a rough sense of bright and dim spots but its sensor is not built for illuminance readings. Calibration varies between phones and models, so treat app numbers as relative, not absolute. A dedicated lux meter gives a reading you can compare across spots and days. Use the phone to shortlist positions, then confirm with a meter.
Should I measure light before moving the desk?
Yes, measure before moving the desk so the new position is chosen on readings rather than on how bright the room looks. Test the candidate spot at the hours you actually work there, with the furniture in place. Light changes through the day as the sun moves, so a single reading can mislead. Record the numbers and compare before committing to the move.