Inside Mount vs Outside Mount Shades

Compare inside mount vs outside mount shades by window recess depth, bracket placement, light gaps and coverage, so you can pick the fit your window allows.

8 min read0 views
— · 0 votes
Contents
  1. What sets inside and outside mounts apart
  2. Check the window recess depth first
  3. How each mount handles light gaps
  4. Match the mount to the window frame
  5. Bracket placement and fixing surfaces
  6. Compare inside and outside mount shades
  7. Measure before you order either style
  8. When to call a specialist
  9. Questions about inside and outside mount shades
  10. Do inside mount shades let light in around the edges?
  11. Can I use an outside mount if my window recess is shallow?
  12. Which mount covers more of the window?
  13. Do cellular shades work with both mounting styles?
  14. What is the light gap on outside mount shades?
  15. Can I change from an inside mount to an outside mount later?

Inside mount shades fit within the window recess, while outside mount shades attach to the wall or trim around the window. The choice comes down to recess depth, how much light you want to block, and how much of the window frame you want to see. Measuring the window before you decide keeps either fit workable.

  • Inside mount shades need enough recess depth to hold the brackets and the rolled or folded shade.
  • Outside mount shades cover the whole window opening and reduce light gaps at the edges.
  • An outside mount can hide an uneven frame or a shallow recess that rules out an inside fit.
  • Both styles use mounting brackets, so check the fixing surface and clearance before ordering.
  • Measure the recess depth and the frame width first, then choose the style that suits those numbers.

What sets inside and outside mounts apart

Inside mount shades sit within the window recess, so the shade hangs flush with the wall surface. Mounting brackets attach to the top of the recess or to the window frame, depending on the shade style. The look is tidy because the shade disappears into the opening when raised.

Outside mount shades attach to the wall or to the face of the trim around the window. The shade hangs in front of the opening and overlaps the edges on all sides. This arrangement covers the whole window and the frame, which changes how the room reads.

The two styles differ in more than appearance. Inside mount shades depend on a recess deep enough to hold the hardware and the folded or rolled fabric. Outside mount shades depend on a flat, solid surface around the window where brackets can be fixed.

Check the window recess depth first

Window recess depth decides whether an inside mount is possible at all. The recess must be deep enough for the mounting brackets and for the shade to sit without rubbing the glass. Cellular shades and other folded styles need room for their stack when raised.

A shallow recess can still take an inside mount if the shade is slim and the brackets are low profile. Measure from the glass to the wall face at the top, middle and sides of the recess. The smallest of those readings is the usable depth for planning.

When the recess is too shallow for the hardware, an outside mount is the practical answer. A trained installer can confirm whether a particular shade and bracket combination fits the depth you have. Guessing at clearance risks a shade that binds or a frame that cracks.

How each mount handles light gaps

Light gap is the sliver of daylight that escapes around the edges of a shade. Inside mount shades leave a small gap at each side and often at the top, because the shade sits within the opening. The gap is narrow but visible on a bright day.

Outside mount shades overlap the opening, so they reduce the light gap along the sides and top. Fabric that extends past the frame blocks light that would otherwise pass the edges. A deeper overlap gives more coverage, though it also covers more of the wall.

For a room where darkness matters, the outside mount does more of the work. For a room where the frame is worth showing, the smaller gap of an inside mount is a fair trade. Neither style seals a window completely without added side channels.

Match the mount to the window frame

The window frame and trim shape how each mount looks and performs. Inside mount shades keep the trim visible and sit behind it, which suits a deep recess with an intact frame. Outside mount shades hide the trim behind the fabric and can disguise a chipped or uneven edge.

Trim that projects far from the wall complicates an outside mount, because the brackets need a flat face. A shade mounted on a projecting trim can stand away from the glass and let light past the sides. Inside mount shades avoid that problem when the recess is deep enough.

Very narrow trim leaves little room for outside brackets, so the fixing may move to the wall above the window. Each of these choices changes the overlap and the look, so settle the frame question before you order.

Bracket placement and fixing surfaces

Mounting brackets carry the whole weight of the shade, so the surface behind them matters. Inside mount brackets fix to the recess ceiling or the frame, which is often solid timber or a firm header. Outside mount brackets fix to the wall or trim face and need a flat, sound area.

Plasterboard, drywall and hollow trim may need suitable anchors or extra blocking for either style. A bracket that pulls free can drop the shade, so a trained fitter should judge the fixing for heavy shades. Light shades on sound timber are a simpler job than a wide shade on a hollow wall.

Whichever mount you pick, keep the brackets level and at the height the shade maker specifies. Level brackets keep the shade running straight and stop it drifting to one side. Follow the maker's fixing instructions rather than improvising with the hardware.

Compare inside and outside mount shades

The table below sets the two styles side by side on the points that decide most installations. Read it against your own window measurements rather than as a ranking. Each row describes a tendency, not a rule for every window.

An inside mount rewards a deep, even recess and a frame you want to keep visible. An outside mount rewards a solid surface around the window and a wish for more coverage. Windows that sit close to a wall or a corner may limit how far an outside shade can extend.

Furniture placement also enters the decision. A shade that projects into the room on an outside mount can clash with a sofa, a desk or a deep sill. Check the clearance to nearby pieces before you commit to the overlap.

PointInside mountOutside mount
PositionWithin the recessOn the wall or trim face
Recess depthNeeds enough depth for brackets and stackNot limited by recess depth
Light gapSmall gap at sides and topSmaller gap with a generous overlap
Frame and trimTrim stays visibleTrim is covered
Room clearanceShade sits inside the openingShade projects into the room

Measure before you order either style

Measuring windows for blinds and shades starts with the opening, not the old hardware. Record the width at the top, middle and bottom of the recess and use the smallest width. Record the height at the left, middle and right and use the longest height.

For an inside mount, measure the recess depth as well and note any obstruction such as a handle or a tilt bar. For an outside mount, decide the overlap on each side and add it to the opening size. The overlap you choose sets the finished width and drop of the shade.

Write the measurements down in the order the shade maker asks for and keep the units consistent. A shade cut to the wrong figure cannot be adjusted back, so a second person should check each number. Where the window is out of square, an outside mount hides the unevenness that an inside mount would show.

When to call a specialist

Some windows need a trained specialist rather than a do-it-yourself fitting. Tall windows, heavy shades, high openings and homes where the fixing surface is uncertain all carry risk. A fall from height or a bracket that gives way can hurt a person or damage the window.

Specialist help is also sensible when the recess contains wiring, a heating unit or an unusual frame. Drilling into the wrong place can damage services or weaken the structure. An installer can assess the surface and choose hardware suited to the load.

You can still make the design decision yourself and hand the measurements to the fitter. Knowing whether you want an inside or outside mount keeps the conversation short. The fitter then confirms the fixing and the clearance.

Questions about inside and outside mount shades

Do inside mount shades let light in around the edges?

Yes, inside mount shades leave a narrow light gap at the sides and often at the top. The shade sits within the window recess, so daylight passes the edges of the fabric. Added side channels or a deeper frame can reduce that gap.

Can I use an outside mount if my window recess is shallow?

Yes, an outside mount solves a shallow window recess because the brackets fix to the wall or trim instead. The shade hangs in front of the opening and needs a flat, solid surface for the mounting brackets. Check that the overlap clears any nearby furniture.

Which mount covers more of the window?

An outside mount covers more of the window because the fabric overlaps the frame on every side. An inside mount stops at the opening and leaves the trim visible. The extra coverage of an outside mount also reduces the light gap.

Do cellular shades work with both mounting styles?

Yes, cellular shades come in versions for inside and outside mounting. The inside version needs enough window recess depth for the folded stack and the brackets. The outside version needs a sound surface around the window for fixing.

What is the light gap on outside mount shades?

The light gap on outside mount shades depends on how far the fabric overlaps the opening. A wider overlap on each side blocks more of the daylight that slips past the edges. A shade that ends level with the frame leaves a larger gap.

Can I change from an inside mount to an outside mount later?

Yes, you can change the mounting style later, but the shade and brackets must suit the new position. An inside mount shade is cut to the recess width, so it may be too narrow for an outside fit. New hardware and a new measurement are needed.

Read next

Latest articles