How to Use a Measuring Tape for Clothes and Sewing

Learn how to use a measuring tape for clothes and sewing: hold the flexible fabric tape snug, read garment measurements, and plan seam allowance for patterns.

3 min read1 views
— · 0 votes
Contents
  1. Holding the tape snug, not tight
  2. Reading garment measurements on flat cloth
  3. Adding seam allowance to the number
  4. Measuring tape questions for sewing
  5. How do you use a measuring tape for clothes?
  6. How do you use a measuring tape for sewing fabric?
  7. Should the tape be tight or loose when measuring a body?
  8. Do I add seam allowance to measurements before cutting?

A measuring tape for clothes and sewing is a flexible fabric tape marked in small units, used to measure the body and flat fabric. You hold the tape snug against the surface, keep it level and flat, and read the number where the tape meets itself or the edge of the cloth. Measurements taken this way feed directly into garments, patterns, and seam allowance decisions. The steps below show how to read the tape and transfer those numbers to fabric.

Holding the tape snug, not tight

A sewing measuring tape must lie flat and snug against the body without pressing into the skin. Snug means the tape touches the surface all the way around and no gap shows under it. A tight tape compresses soft areas and gives a smaller number than the garment needs. Ask another person to read the tape around curved areas, because your own view distorts the line.

Reading garment measurements on flat cloth

Garment measurements are taken on cloth laid flat, with the tape running along a straight edge. Place the zero end at the seam or edge and read the number at the opposite point, keeping the tape parallel to the grain. The flexible fabric tape follows curves without stretching, so it sits accurately on a hem or armhole. Mark the spot with a pin before you lift the tape away.

Adding seam allowance to the number

Seam allowance is the extra cloth beyond the stitching line that keeps the seam from pulling out. A measuring tape helps you add that allowance to a body measurement before you cut. Measure the body, add the allowance your pattern states, then check the total against the tape on the fabric. Taking measurements for patterns works the same way, because the pattern already includes its own allowance.

Measuring tape questions for sewing

How do you use a measuring tape for clothes?

Using a measuring tape for clothes means wrapping the flexible tape around the body at the point you need to size. Keep the tape level, snug, and parallel to the floor, and read the number at the point where the tape overlaps. A second person helps on shoulders and back, where your own reach shifts the tape.

How do you use a measuring tape for sewing fabric?

Sewing with a measuring tape means laying the cloth flat and running the tape along the edge or seam you are checking. Start at the zero end, keep the tape straight and flat, and pin the point you read. The tape also traces curves such as armholes, which a rigid ruler cannot follow.

Should the tape be tight or loose when measuring a body?

The tape should be snug, not tight, when you measure a body for clothes. A snug tape rests on the surface with no slack, while a tight one squeezes the flesh and shortens the reading. Check that the tape stays level all the way around before you note the number.

Do I add seam allowance to measurements before cutting?

Seam allowance is added to the pattern piece or the cut line, not to the body measurement itself. Check what your pattern already includes, then add the extra cloth only where it is missing. Measure the finished total on the fabric with the tape before you cut.

Read next

Latest articles