How to Measure Cable and Wire Length

Learn how to measure cable and wire length along a real route, add slack at corners, and use a simple cable length formula to get the right figure.

3 min read1 views
— · 0 votes
Contents
  1. Trace the route before you measure
  2. Add slack at corners and ends
  3. Use a simple length formula
  4. Cable and Wire Length Questions
  5. How do I calculate cable length for a run with several corners?
  6. Should I use a tape measure or string to measure wire length?
  7. How much slack should I add to a cable length estimate?
  8. How long of a cable do I need for a corner route?

How to measure cable and wire length starts with the path the cable will actually take, not the straight distance between two points. You follow that route with a tape measure or a string, note every corner and rise, and add slack where the cable needs room to bend and connect. The result is a cable length estimate you can trust before you cut or buy.

Trace the route before you measure

Cable run measurement begins by walking the route the cable will follow and marking each turn, drop and entry point. A tape measure works well on straight runs, while a length of string follows bends and curves more easily. Measure along the route rather than through open space, because a cable cannot cut across a room. Record each segment separately so you can add them at the end.

Add slack at corners and ends

Adding slack to a cable length protects the cable where it bends around a corner or enters a box. A cable pulled tight around a corner puts strain on the conductor and the insulation. Leave a service loop at each end so the cable can reach the terminals during connection. The amount of slack depends on the corner radius and the space behind the fitting, so judge it on site.

Use a simple length formula

The cable length calculation formula is the sum of every straight segment plus the allowance for corners and ends. Measure each segment, write it down, and add the segments to get the route length. Add the slack allowance for each corner and each connection point to reach the final figure. A wrap length around a reel or spool uses the same idea, counting each turn as a segment.

Cable and Wire Length Questions

How do I calculate cable length for a run with several corners?

Calculate cable length for a run with corners by measuring each straight segment and adding them together. Add a slack allowance at every corner and at both ends, because the cable needs room to bend and connect. Measuring along the route with string captures the curves that a straight tape measure misses.

Should I use a tape measure or string to measure wire length?

A tape measure suits straight runs, and string suits routes with bends and curves. The string method follows the actual path, then you lay the string straight and measure it with a tape. Use both where a route mixes long straight sections with tight corners.

How much slack should I add to a cable length estimate?

Slack for a cable length estimate depends on the corner radius, the fitting depth and how the cable connects at each end. Add enough at every corner for a gentle bend, and leave a service loop at each end. Judge the allowance on site, since a tight space behind a fitting limits how much cable fits.

How long of a cable do I need for a corner route?

The cable you need for a corner route equals the measured route length plus slack at each corner and end. Measure the run along its real path rather than the straight distance between the two points. Write each segment down as you go, then add them with the allowances to get the total.

Read next

Latest articles