How to Measure a Room for Wallpaper
Learn how to measure a room for wallpaper accurately, including wall height, width, doors and windows, roll dimensions, and pattern repeat, so you can buy the right amount and avoid waste.
Contents
- How do I measure a room for wallpaper?
- What measurements do I need before buying wallpaper?
- How do I account for doors and windows?
- How do roll dimensions affect how much wallpaper I need?
- What is pattern repeat and how do I calculate for pattern matching?
- Step-by-step guide to measuring a room for wallpaper
- Comparison: Different wallpaper scenarios and measurement considerations
- How do I choose the right amount based on my room layout?
- Common mistakes to avoid when measuring
How do I measure a room for wallpaper?
To measure a room for wallpaper, calculate the total square footage of wall space to be covered, subtract areas not being papered such as doors and windows, and then divide by the usable square footage per roll based on its dimensions and pattern repeat. Accurate measurements of wall height and width are crucial to avoid over- or under-ordering.
What measurements do I need before buying wallpaper?
You need to measure the height and width of each wall you plan to cover. Standard wall height is typically 8 feet (96 inches) or 9 feet (108 inches), but older homes may vary. Measure from the top of the baseboard to the ceiling or crown molding for wallpaper application. For wall width, measure horizontally along the wall, including any fixed elements like windows, as wallpaper is applied behind and around them if you plan to cover those areas.
Use a steel tape measure for accuracy, and record measurements in inches or centimeters. For each wall, multiply height by width to get the area in square feet or square meters. Add all wall areas together for the total wall surface.
How do I account for doors and windows?
Doors and windows are typically not papered, so their areas should be subtracted from the total wall area. Measure the height and width of each door and window, including the frame, and calculate their areas. Standard doors are often 80 inches by 32 inches (6.67 ft × 2.67 ft ≈ 17.8 sq ft). Windows vary; measure accurately. Subtract the sum of all door and window areas from the total wall area. However, do not subtract for small areas like electrical outlets. It is always safer to order slightly more than less to account for cutting and pattern matching.
How do roll dimensions affect how much wallpaper I need?
Wallpaper rolls come in various sizes, but a common American single roll covers about 36 square feet (though it may be packaged as a double roll covering 72 square feet). European rolls often differ. Check the roll dimensions: length and width. A typical roll is 33 feet long and 20.5 inches wide, covering about 56 square feet. To calculate the number of rolls, divide the total wall area (after subtracting doors/windows) by the usable coverage per roll. Always round up to the nearest whole roll, and consider buying an extra roll for future repairs.
What is pattern repeat and how do I calculate for pattern matching?
Pattern repeat is the vertical distance between one point in the pattern and the identical point vertically. It is usually printed on the wallpaper label. For example, a repeat of 24 inches means the pattern matches itself every 24 inches. This affects how much wallpaper is wasted when aligning the pattern between strips. To account for pattern repeat, add the repeat length to the wall height for each drop (strip) if the repeat is larger than any waste from alignment. A simple method is to calculate the number of strips needed and multiply by the adjusted drop length, then divide by roll length. Most wallpapers with large repeats require more rolls.
Step-by-step guide to measuring a room for wallpaper
- Measure wall height: Measure from the top of the baseboard to the ceiling in several places; use the maximum if the floor/ceiling is uneven. Record in inches.
- Measure wall width: For each wall segment, measure horizontally from corner to corner. Include any recessed areas.
- Calculate total wall area: For each wall, multiply height by width. Sum all wall areas.
- Measure doors and windows: Measure height and width of each, including trim. Multiply to get area, and sum these areas.
- Subtract openings: Total wall area minus total opening area equals net paperable area.
- Determine roll coverage: Check the wallpaper roll dimensions and usable area. If pattern repeat is present, adjust usable drop length.
- Divide and round up: Divide net area by usable area per roll. Round up to nearest whole roll, and add one roll for waste/matching.
Comparison: Different wallpaper scenarios and measurement considerations
| Scenario | Key Measurements | Roll Calculation Notes |
|---|---|---|
| Small powder room with one door | Wall height, width, door area | Subtract door area; may need 2-3 single rolls |
| Large living room with multiple windows | All wall dimensions, each window area | Subtract windows; add extra for matching large pattern repeat |
| Accent wall behind bed | Only that wall's height and width | One wall only; order accordingly; check roll width to minimize seams |
| Room with high ceilings (over 9 ft) | Tall wall height | Longer drops; may need more rolls due to less usable length per roll |
| Wallpaper with large pattern repeat | Pattern repeat length | Add repeat to each drop height; increases roll count by 10-20% |
How do I choose the right amount based on my room layout?
Consider the number of cuts and seams. Walls with many corners, doors, or windows require more trimming and waste. If your room has a complex layout with alcoves or angled walls, measure each section separately and add 10-15% extra for waste. For simple rectangular rooms with few openings, the standard calculation plus one extra roll usually suffices.
Common mistakes to avoid when measuring
- Not measuring wall height accurately; assume standard height.
- Forgetting to subtract closet doors or built-in areas if not papering.
- Ignoring pattern repeat and ordering too few rolls.
- Not accounting for waste from trimming at ceiling and baseboard.
- Measuring in feet without converting to inches for precise calculations.
Related articles
How to Measure a Room for Paint
How to measure a room for paint: survey the space, find wall and ceiling area, subtract doors and windows, and calculate litres from paint coverage and coats.