How to Choose Blackout Blinds for a Bedroom
Practical guide to selecting blackout blinds for a bedroom based on your existing window measurements, mounting options, and daily use. Learn how to minimize light gaps, compare inside vs outside mounts, and layer curtains for better sleep.
Contents
Blackout blinds for bedrooms are window coverings designed to block almost all external light, improving sleep quality and privacy. To choose the right ones for your space, start with accurate window measurements, decide between an inside mount or outside mount, and account for light gaps around the edges. In most bedrooms, an outside mount with a frame overlap reduces light leakage better than an inside mount, but the best choice depends on your window recess depth and room layout.
Assess Your Bedroom and Window Dimensions
Begin by examining the window itself, not the room as a whole. Note the window width and height at three points: top, middle, and bottom for width; left, middle, and right for height. Use the smallest measurement for an inside mount. Also measure the window recess depth—the distance from the front edge of the recess to the glass. This determines whether an inside mount is feasible.
Look at the area around the window. Is there enough flat wall space above and beside the window for an outside mount? Are there obstructions like handles, cranks, or trim that might interfere? Consider furniture placement: a bed directly under the window may limit how far blinds can project into the room.
Compare Mounting Options: Inside vs. Outside
Inside mount means the blind is installed within the window frame, sitting inside the recess. This creates a clean, built‑in look and keeps the blind flush with the wall. It requires a recess depth of at least 2 inches (5 cm) for most blinds, though deeper is better to fully cover the glass and avoid protruding.
Outside mount means the blind is installed on the wall or trim above the window, covering the entire window opening and overlapping the surrounding area. This is often better for light blocking because the blind can extend beyond the window edges, sealing off side and top gaps. It is also the only option if the recess is too shallow or if the window is not square (e.g., in older homes where the frame may be slightly skewed).
| Feature | Inside Mount | Outside Mount |
|---|---|---|
| Light blocking | Potential light gaps on sides and top if recess is uneven; requires precise fit | Better coverage; can overlap window frame to minimize gaps |
| Aesthetics | Clean, minimalist; preserves window trim | May cover decorative trim; adds bulk to wall |
| Installation | Requires sufficient recess depth and square frame | Works with any recess; mounts on wall or trim |
| Room darkening | Can be improved with side channels or blackout liners | Usually darker with proper overlap and side seals |
Minimize Light Gaps in Your Bedroom
Even blackout blinds can leak light around the edges, which often bothers light‑sensitive sleepers. Side gaps are common with inside mounts because the blind must be slightly narrower than the recess to operate smoothly. To reduce them:
- For inside mounts, order the blind with the smallest width measurement minus 1/4 inch (6 mm) for clearance, but be aware of resulting side gaps.
- Choose a blind with light‑blocking fabric that is tightly woven and has a blackout coating on the back.
- Add side channels (U‑shaped tracks) that the blind edges slide into, sealing the sides.
- For outside mounts, extend the blind at least 2–3 inches (5–7.5 cm) beyond the window frame on all sides, and mount it high enough to cover the top gap.
If you prefer layered window treatments, consider adding curtain layering: install blackout blinds inside the recess and hang floor‑length blackout curtains over them. The curtains cover the side gaps and add thermal insulation and style.
Sketch Your Layout and Consider Everyday Use
Draw a simple floor plan of your bedroom, marking the window, bed, circulation paths, and any furniture near the window. This helps visualize how the blind will operate and whether it will interfere with daily activities.
Think about how you use the room during the day. If you need darkness for daytime naps, the blind should completely block sunlight. If you value a view when the blind is open, an inside mount keeps the window frame visible and may be less obtrusive. If you often open and close the blind, consider the control mechanism: a cordless lift is safer for homes with children and pets, while a motorized option can be scheduled to raise before your alarm.
Also account for the window sill depth if you have plants or decorative items. An inside mount blind may not fully clear the sill when raised, reducing usable sill space.
Choose the Right Blackout Blind for Your Space
Based on your measurements and priorities, decide between:
- Inside mount roller shade with side channels: Best for deep recesses and a sleek look; side channels can achieve near‑total darkness.
- Outside mount cellular (honeycomb) shade: Excellent insulation and light blocking; can be mounted close to the ceiling to make the window appear taller.
- Blackout Roman shade: Soft fabric look; outside mount with overlap works well.
- Layered approach: Inside mount blind plus blackout curtains for maximum light control and aesthetic flexibility.
Remember that no blind is 100% light‑proof unless professionally installed with custom side seals, but the right combination of mount, size, and additional treatments can reduce light to a level that supports restful sleep.
Related articles
How to Choose Window Coverings for Privacy Without Losing Daylight
How to choose window coverings for privacy and light based on your room's measurements, fixed features, furniture and daily use, with shades, blinds and curtains compared.
Window Treatments for Corner Windows: How to Choose Curtains, Blinds and Shades for Your Room
How to choose curtains, blinds or shades for corner windows by measuring your room, checking frame depth and clearance, and balancing privacy and daylight.