Floor Plan for a Small Laundry Room

Plan a small laundry room with a measured floor plan: washer and dryer footprint, door swing clearance, counter depth, and a storage wall that keeps the floor clear.

3 min read0 viewsFloor Plan for a Small Laundry Room
— · 0 votes
Contents
  1. Measure the appliances before you draw
  2. Plan the door swing and clearances
  3. Fit a work counter and storage wall
  4. Layout questions for a small laundry room
  5. How do I fit a floor plan for a small laundry room into a narrow space?
  6. How much clearance is needed for opening appliance doors?
  7. What work counter depth should a small laundry room have?
  8. Where should the storage wall go in a floor plan for a small laundry room?

A floor plan for a small laundry room starts with the measured footprint of the washer and dryer, then adds the clearances each appliance needs to open, load, and be serviced. Draw the room to scale, mark the door swing, and place the machines against a wall that leaves a work counter and a storage wall within reach. The plan you draw decides whether the room works, so settle the machine positions before you choose cabinets or shelves.

Measure the appliances before you draw

The washer and dryer footprint sets the size of every other zone in a small laundry room. Measure the width, depth, and height of each machine, including the door and any hoses or vent that stick out at the back. Add the clearance the manufacturer specifies for airflow and for opening the appliance door. A plan drawn on graph paper with one square per unit of length makes the fit visible before you buy anything.

Plan the door swing and clearances

Door swing decides where a person stands and where the machines can sit without blocking the way in. Draw the room door and every appliance door at its open position on the plan. Clearance for opening doors means the path a person walks while loading or emptying, so keep that lane free of storage. A machine placed behind a door that opens inward traps the user and should move to another wall.

Fit a work counter and storage wall

A work counter gives the small laundry room a folding and sorting surface that the machines alone cannot provide. Set the work counter depth to match the machines so the front edge lines up and the surface sits flush. A storage wall of shelves or tall cabinets above the counter holds detergent and baskets without taking floor space. Keep the shelves shallow so they do not overhang the counter and block your head as you work.

Layout questions for a small laundry room

How do I fit a floor plan for a small laundry room into a narrow space?

A narrow laundry room works when the washer and dryer sit side by side against one long wall and the door swings clear of them. Measure the wall length against the combined appliance width plus the side clearance each machine needs. A stacked pair frees floor space when the room is too narrow for a side-by-side row. Draw the stack on the plan with its full open door and confirm the ceiling height allows it.

How much clearance is needed for opening appliance doors?

Clearance for opening doors depends on the appliance door type and the direction it swings. A front-loading washer door swings out and needs a clear half circle in front of it for a person to stand and load. Add this space to the plan before you decide where a counter or storage wall can sit. A top-loading machine needs room above and beside it for the lid and the user.

What work counter depth should a small laundry room have?

Work counter depth should match the depth of the washer and dryer so the counter front lines up with the appliance fronts. A counter that is deeper than the machines pushes into the standing space, and a shallower one leaves a ledge. Measure the machine depth with its hoses and vent in place, then order the counter to that figure. The counter can bridge across the tops of both machines or sit beside them.

Where should the storage wall go in a floor plan for a small laundry room?

A storage wall works on the side of the room that faces the machines, above the work counter or on a short wall. Shelves placed above the counter keep supplies within reach without narrowing the floor lane. Tall cabinets belong on a wall where their doors open away from the appliance doors. Draw the open cabinet doors on the plan so they do not collide with the washer or dryer.

Latest articles