Fitted Furniture Measurements: How to Plan Width, Height and Depth in the Room You Have
How to measure your room for fitted furniture, choose wardrobe depth, plan width and height, allow for uneven walls and door clearance, and compare layouts.
Contents
- What fitted furniture measurements do you need before planning?
- How do you measure a room for built-in furniture?
- Recording fixed features that affect fitted furniture
- Uneven walls, floors and ceilings
- What is the depth of a fitted wardrobe?
- How door type changes wardrobe depth
- Wardrobe depth options compared
- Fitted wardrobes measurements: planning width
- Fitted wardrobes measurements: planning height and hanging space
- Allow for lifting full-height units into place
- Dividing height into hanging and shelf zones
- External dimensions, usable internal depth and installation allowances
- How do access and circulation affect fitted furniture placement?
- How to explore measured layouts and compare furniture footprints
- How to sketch a more useful corner
- Choosing the right changes for your space
Plan fitted furniture by measuring the room as it really is. Take each width, height and depth at several points and work from the smallest reading. Mark every fixed feature, such as skirting boards, sockets, windows, radiators and doors. Then subtract installation allowances and the clearance needed to open doors and move around. For fitted wardrobes, a typical external depth is around 600 mm. That leaves roughly 550 mm or more of usable internal depth, which is enough for clothes on hangers to hang facing forwards. The right width and height come from the room's limits and how you use the space every day, not from a standard catalogue size.
This guide starts with the room you already have. It covers how to record its measurements and obstacles, how depth, width and height each affect built-in furniture, and how to compare layouts and corner options on paper before you commit.
What fitted furniture measurements do you need before planning?
Before planning fitted furniture, you need three sets of information: the room's overall dimensions, the position of every fixed feature, and the clear space needed for walking and opening doors. Width, height and depth only become useful once they are linked to what surrounds them.
- Overall dimensions: wall lengths, floor-to-ceiling height and any recesses or chimney breasts, all in millimetres.
- Fixed features: skirting boards, coving, picture rails, window frames and sills, radiators and their pipes, sockets and switches, light fittings, loft hatches, sloping ceilings and boxed-in pipework.
- Doors and openings: the width of the room door, which way it swings and how far its arc reaches into the room.
- Circulation paths: the routes you actually walk, for example from the door to the bed, window or en-suite.
- Everyday uses: what the furniture must hold, such as long coats, folded knitwear, shoes or bedding, and whether more than one person uses it at once.
Millimetres are the clearest unit for fitted furniture measurements. Makers and installers work in them, and they avoid rounding errors that can add up across a run of units.
How do you measure a room for built-in furniture?
Measuring a room for built-in furniture means taking each dimension more than once, because walls, floors and ceilings are rarely perfectly straight or square. The smallest reading for any space is the one that limits what will fit.
- Measure the width at three heights. Measure wall to wall near the floor just above the skirting, at about waist height, and just below the ceiling. Write down all three and take the smallest as the working width.
- Measure the height at three or more points. Measure floor to ceiling at the left end, the middle and the right end of the planned run. Ceilings often dip or rise, so plan from the lowest point.
- Measure the available depth. Measure out from the back wall to any obstacle in front, such as a bed, window reveal, door arc or radiator. Also note how far the skirting board and any coving stick out from the wall.
- Check for square. In a recess, measure both diagonals. If they differ noticeably, the corners are not at right angles, and side panels will need scribing or filler pieces.
- Check that the walls are plumb and the floor is level. Hold a long spirit level against each wall and on the floor along the run. Note where the gaps are and roughly how large.
- Locate the fixed features. For each socket, switch, window or radiator, record its distance from a fixed corner and from the floor, plus its own width and height.
- Sketch and label. Draw a simple plan and an elevation of each wall. Write every measurement on the sketch at the point where you took it.
Recording fixed features that affect fitted furniture
Fixed features decide where fitted furniture can and cannot go. Each one either reduces a dimension or calls for a cut-out, a gap or a decision to move it.
- Skirting boards stop a carcass from sitting flat against the wall. You can remove them behind the unit, scribe the unit around them, or bring the unit forward by the skirting's thickness.
- Coving and picture rails limit how close a full-height unit can sit to the ceiling and wall.
- Sockets and switches inside the footprint may need moving by a qualified electrician, or the unit must be designed to leave them accessible.
- Radiators generally should not be enclosed behind wardrobe doors. Heat and access for maintenance both matter.
- Windows limit height and depth beside them. Check how far the frame, sill and any opening casement project, and where the curtains or blinds hang.
Uneven walls, floors and ceilings
Uneven walls and sloping floors are normal in many homes, especially older ones. Fitted furniture deals with them through adjustment, not by assuming the room is square. Carcasses are usually set level and plumb on adjustable feet or a plinth. The gaps against the walls, floor and ceiling are then closed with scribed filler panels cut to follow the actual surface. This is why your measurements should record where the room is out of true, not only its average size.
What is the depth of a fitted wardrobe?
A typical fitted wardrobe is about 600 mm deep externally, from the back wall to the front of the doors. This depth allows a hanging rail to run side to side, with hangers facing forwards and clothes clear of the back and the doors. The usable internal depth is less than the external dimension. Back panels, door thickness and, for sliding doors, the track all take up some of it.
A standard adult coat hanger is roughly 400 to 450 mm wide. A side-to-side rail therefore needs internal depth beyond the hanger itself, so bulky jackets do not press against the doors. If you measure your own widest hangers and thickest coats, you have a better guide than any general figure.
How door type changes wardrobe depth
Door type affects both how deep a fitted wardrobe needs to be and how much room you need in front of it.
- Hinged doors sit on the face of the carcass and add little depth. They do need clear floor space in front, roughly equal to the width of each door, to swing open fully.
- Sliding doors need no swing space. Their tracks and overlapping panels add depth to the front of the unit, and only part of the interior is visible at any one time.
Wardrobe depth options compared
| Depth approach | How clothes hang | Best suited to | Main trade-off |
|---|---|---|---|
| Standard depth, about 600 mm external | Forward-facing on a side-to-side rail | Rooms with enough floor space in front | Takes the most floor area |
| Deeper than standard | Forward-facing with extra clearance | Bulky coats, or sliding doors that add front depth | Reduces circulation space further |
| Shallow, used for hanging | Front-to-back on pull-out or end-on rails | Narrow rooms, landings, alcoves | Holds fewer garments per metre of width |
| Shallow, shelving only | Folded items, no hanging | Tight spaces beside doors or windows | No hanging space |
Choose a shallower wardrobe if a standard depth would block a door, leave too narrow a walkway beside the bed or overlap a window. Accept that you will store less per metre of wall.
Fitted wardrobes measurements: planning width
The width of a fitted wardrobe is the clear wall length available, less the space taken by scribed fillers at each end. It is then divided into sections that suit the doors and the interior layout. Start from the smallest of your three width readings.
- End fillers: a filler or scribe panel at each wall end takes up the unevenness of the wall. It also gives hinged doors and drawers room to open without hitting the wall or a door frame.
- Door widths: narrower hinged doors need less swing space in front but more of them are needed. Wider doors give a more open view of the interior but sweep further into the room.
- Section widths: divide the run so that each section has a clear job, such as long hanging, double hanging, shelves or drawers. Try to align the internal divisions with the doors so that nothing is hidden behind a fixed panel.
- Corners: where a run meets another wall or a second run, check that doors and drawers on both sides can open without clashing.
Fitted wardrobes measurements: planning height and hanging space
The height of a fitted wardrobe is limited by the lowest point of the ceiling. Within that height, the interior is divided into zones by how often you reach each part. Full-height units make use of the space above head height. Part-height units leave room for coving, sloping ceilings or a less dominant look.
Allow for lifting full-height units into place
A full-height carcass is usually built on its back and then tilted upright. While tilting, its diagonal must clear the ceiling. You can check this with the carcass height and depth: the diagonal equals the square root of height squared plus depth squared. For example, a carcass 2,400 mm tall and 600 mm deep has a diagonal of about 2,474 mm. It cannot be tilted upright under a 2,450 mm ceiling. This is one reason fitted furniture often uses a carcass shorter than the room, with a plinth below or a filler above to close the gap.
Dividing height into hanging and shelf zones
| Zone | Typical use | How to size it |
|---|---|---|
| Upper zone, above head height | Seasonal clothes, luggage, spare bedding | Whatever height remains above the main zone. Plan for a step if you will reach it often. |
| Long hanging | Coats, dresses, long trousers | Measure your longest garments on hangers and add a little clearance above the floor or drawer below |
| Double or short hanging | Shirts, jackets, folded trousers | Two rails stacked, each sized to your typical shirt or jacket length on a hanger |
| Middle shelves and drawers | Folded clothes, accessories | Keep within easy reach, roughly between hip and shoulder height |
| Lower zone | Shoes, baskets, heavier items | Allow for the plinth height and for any skirting left in place |
Size hanging space from your own clothes. Hang your longest coat and your typical shirt, then measure from the top of the hanger hook to the hem. This tells you whether a section can take double hanging or needs long hanging.
External dimensions, usable internal depth and installation allowances
Three numbers describe any piece of built-in furniture, and confusing them is a common cause of poor fit.
- External dimensions are the overall width, height and depth the unit takes up in the room, including doors, handles, plinth and fillers.
- Usable internal depth is the clear space inside, from the inner face of the back to the inner face of the doors or any track. It decides whether hangers, boxes or baskets will fit.
- Installation allowances are the deliberate gaps planned between the carcass and the room. They let the unit be manoeuvred, levelled and scribed to uneven surfaces, and are later hidden by fillers and trims.
When you compare a design to your room, check the external dimensions against the space available. Check the usable internal depth against what you want to store. Ask your maker what allowances they include, because different makers work in different ways.
How do access and circulation affect fitted furniture placement?
Placement works only when you can open the furniture fully and still move comfortably around the room. Measure clearance from the front of the closed unit to the nearest obstacle, then compare it with what each opening needs.
- Wardrobe door clearance: a hinged door needs a clear arc at least as wide as the door itself. Check that this arc does not hit the bed, a bedside table, the room door or a window.
- Drawers: a drawer needs space for its full pull-out depth, plus room for you to stand in front of it.
- Walkways: leave a clear route along the furniture that you can use while doors are open, not only when they are closed.
- Room door: make sure the room door can open fully and that fitted furniture beside the frame does not pinch the doorway.
- Shared use: if two people dress at the same time, consider whether both can stand at the unit without blocking each other.
A simple test is to mark the planned footprint on the floor with masking tape, including the door arcs. Then walk your normal routes and act out opening doors and drawers. Problems that are hard to see on paper usually become obvious within minutes.
How to explore measured layouts and compare furniture footprints
Exploring layouts means testing several arrangements against the same accurate room plan before choosing one. Working to scale on paper or in a basic drawing tool lets you change things freely, which you cannot do once furniture is built.
- Draw the room to scale. Use a convenient scale, such as 1:20. Include every fixed feature and door swing from your measurements.
- Mark circulation paths. Shade the routes you use every day so you can see which floor areas must stay clear.
- Draw each option's footprint. Show the external depth and width, plus door arcs or sliding door overlaps.
- Check each option against the paths. Any footprint or door arc that cuts into a shaded route needs a change in depth, door type or position.
- Draw an elevation for the best options. Check heights against windows, sloping ceilings, sockets and light fittings.
- Test the favourite at full size. Tape it out on the floor before ordering.
| Layout option | Storage gained | Effect on access | When it suits |
|---|---|---|---|
| Single wall, full width | Long continuous run | Keeps the rest of the room open if depth allows | A clear wall free of windows and radiators |
| Alcove or recess units | Uses space that is otherwise awkward | Little effect on circulation | Rooms with chimney breasts or recesses |
| L-shaped run | Extra storage around a corner | Corner access and door clashes need care | Larger rooms with two free walls |
| Units around a bed or window | Uses wall space above and beside | Must leave space to get in and out of bed and to open windows | Smaller rooms where wall space is limited |
| Shallow run in a narrow room | Less per metre, but storage where none fitted before | Preserves a usable walkway | Narrow bedrooms, landings, hallways |
How to sketch a more useful corner
A corner becomes more useful when its interior is planned for access and not simply filled. Where two runs of fitted furniture meet, the space deep in the corner is hard to reach. Doors on the two runs can also collide.
- Blind corner: one run passes in front of the other's end. It is simple to build, but the hidden space suits only rarely used items.
- Corner hanging: a rail runs into or around the corner. It adds hanging space, but garments at the back are less easy to see.
- Open corner shelving: it avoids door clashes and keeps everyday items visible, but contents are on show.
- Stop the run short: leave the corner empty, or use it for a chair, mirror or freestanding piece. You lose some storage but keep the doors and walkway clear.
To sketch a corner, draw both runs at their external depth. Add the door arcs on both sides and check where they overlap. Then shade the area inside the corner that you could actually reach with doors open. If that area is small, a filler panel between the runs or a shorter run on one side may serve you better than squeezing in more cabinet.
Choosing the right changes for your space
The best fitted furniture plan balances storage against floor space, access and the room's fixed features. It does not chase the largest unit that will physically fit. Use your measurements to answer a few practical questions before deciding.
- Does a standard wardrobe depth leave a comfortable walkway with doors open? If not, would sliding doors or a shallower unit work better?
- Is your limit set by width, height or depth? Put extra storage where the room has spare space, for example upwards where depth is tight.
- Do your own clothes need more long hanging or more double hanging, shelves and drawers?
- Which fixed features are worth moving, such as a socket, and which should the design work around, such as a window or radiator?
- Have you allowed for skirting boards, uneven walls and installation allowances, or is the plan based on a single wall-to-wall reading?
Accurate fitted furniture measurements, taken from the room as it is and tested against how you use it, give you a design that fits on the day it is installed and works every day after.
Related articles
Fitted Furniture Around Skirting Boards: Planning for Real Rooms
How to plan fitted wardrobes and cabinets around skirting boards in your actual room. Covers measuring, scribe panels, plinth options, cutouts, rear clearances, filler panels and the trade-offs that make a fitted design work with the space you have.