Entryway Corner Coat Closet and Coat Storage Ideas
Plan an entryway corner coat closet or open coat storage for a hallway corner: clearance for coats, entryway depth, hooks, doors and a shoe shelf above the floor.
Contents
- Measure entryway depth before choosing a corner closet
- Clearance for coats inside a corner unit
- Hooks, doors and open corner storage
- Corner Coat Storage Questions
- How deep does an entryway corner coat closet need to be?
- What clearance do coats need in a hallway corner?
- Can I use coat hooks instead of a corner closet?
- Which closet doors suit a tight entryway corner?
An entryway corner coat closet turns an unused hallway corner into coat storage, and the layout works when you match the closet depth to the clearance your coats need. A shallow corner cabinet, a rod and hooks, or a bench with a shoe shelf above the floor can each fit a corner, but the entryway depth and the swing of the closet doors decide which option fits your space.
Measure entryway depth before choosing a corner closet
Entryway depth sets the limit on what a corner closet can hold. Hanging coats on a rod needs a depth close to the width of the shoulders of the coat, so a full-depth rod closet eats into a narrow hall. A shallower corner closet holds coats facing sideways or on angled hooks, which keeps the walkway open. Measure the corner from the wall to the nearest door or opening and keep that passage clear.
Clearance for coats inside a corner unit
Clearance for coats is the space a hung coat needs to sit without pressing against the back wall or the door. A coat on a hanger takes depth for the hanger plus the bulk of the fabric, and heavy winter coats take more than light jackets. Set the rod back from the door so the door closes without crushing the coats. Leave a gap above the floor for the hems and for a shoe shelf above the floor.
Hooks, doors and open corner storage
Coat hooks suit a corner that is too shallow for a full closet and keep the coats in view. A corner unit with bi-fold or sliding closet doors saves the swing space that hinged doors need in a hallway. Open storage with a bench and hooks works for bags and short jackets, while a closed corner closet hides the bulk. Match the door type to the free floor in front of the unit.
Corner Coat Storage Questions
How deep does an entryway corner coat closet need to be?
An entryway corner coat closet needs enough depth for the coats you hang, and that depth depends on the shoulder width of the bulkiest coat. A rod set parallel to a side wall holds coats facing the room and takes less depth than a rod across the front. Measure a coat on its hanger before you fix the depth of the unit.
What clearance do coats need in a hallway corner?
Clearance for coats in a hallway corner must cover the hanger, the fabric and a little air so the door shuts freely. Coats pressed against a back panel crease and trap damp, so set the rod forward of the wall. The free walkway past the corner also counts, and a shallow unit protects it.
Can I use coat hooks instead of a corner closet?
Coat hooks work in a corner that is too shallow for a closet and hold coats, bags and hats at hand. Hooks take far less depth than a rod because the coat hangs flat against the wall. A corner hook rail with a shoe shelf above the floor gives storage without a door swing.
Which closet doors suit a tight entryway corner?
Sliding and bi-fold closet doors suit a tight entryway corner because they do not swing out into the walkway. Hinged doors need free floor in front of the unit, which a narrow hall may not have. Check the door travel against the corner walls before you order the unit.