Corner Bench With Storage for a Dining Table

Plan a corner bench with storage for a dining table: measure the corner, size the seat, choose a lid or drawer build, and keep the table clear to sit down.

9 min read0 views
— · 0 votes
Contents
  1. Start with the corner's job
  2. Measure the table and the seating run
  3. Set the seat height and depth
  4. Choose how the storage opens
  5. Plan the build and the fixings
  6. Keep the table clear to sit down
  7. Compare bench layouts for a dining corner
  8. Build in comfort and easy cleaning
  9. Corner dining bench questions
  10. What is a corner bench with storage for a dining table?
  11. How deep should a corner dining bench with storage be?
  12. Should the storage open with a lid or a drawer?
  13. Can I build a DIY corner dining bench with storage myself?
  14. How much space do I need between the bench and the table?

A corner bench with storage for a dining table pairs two jobs in one footprint: it seats people along two walls and hides the items a dining corner collects. The build works when the bench is sized to your table and room first, and when the storage opens without blocking the table. Measure the corner, then choose the seat height, depth and access before any boards are cut.

  • Measure the corner walls and the table clearance before choosing a bench size.
  • A seat height near the table's apron and a depth that fits your corner keep the bench usable.
  • Lift-up lids and pull-out drawers each suit different items and different floor space.
  • Storage access must stay clear of chair backs and the table edge on the open side.
  • A fixed bench along two walls leaves more floor free than an L of loose chairs.

Start with the corner's job

A corner bench with storage earns its place when the corner belongs to the dining table rather than to traffic. Walk the room and note where people pass on the way to another door or the kitchen. A bench along two walls closes that corner to walking, which suits a dining zone tucked beside a wall.

The other use of the corner decides how the bench faces. A banquette that wraps two walls serves a square or round table pushed close to it. A single straight bench with storage works where only one wall is free and chairs sit on the other three sides of the table.

Draw the table on the floor plan before you sketch the bench. Mark the open side where people step in and out, and keep that path wider than the bench depth. Storage that opens into that stepping zone will be hard to use while the table is set.

Measure the table and the seating run

Bench dimensions follow the table, not the other way round, so start with the table height and the length of the two walls. A dining table surface sits at a set height for the chairs you own, and the bench seat is cut to leave room for the thighs below the table edge.

Measure each wall from the corner to the point where the bench must stop, such as a doorway or a window sill. The shorter wall sets the depth of the return arm on an L-shaped bench. Note the corner angle, because walls that are not square need a filler panel behind the bench.

Allow space for people to slide along the bench to their place. Each diner needs a seat width along the run, and the last seat should not sit hard against a side wall. Record these numbers on the plan and keep them when you price the boards.

Set the seat height and depth

Seat height for a corner dining bench is set against the table, so the top of the seat sits below the table apron by a hand's width. Measure from the floor to the underside of the table frame, then subtract the thickness of the seat cushion you plan to use.

Seat depth depends on how the bench is used. A bench meant for sitting upright and eating needs less depth than one meant for leaning back with a cushion. Deep benches take floor space from the table and push the table further into the room.

The storage box below the seat fixes the depth of the frame in most builds. A shallow drawer needs less depth than a lift-up box for board games. Check that the open lid or drawer clears the table edge and the chair backs on the open side.

Choose how the storage opens

Lift-up lids and pull-out drawers are the two storage builds for a corner dining bench, and each changes what you can store. An open box under a hinged seat lid holds bulky items such as bedding, trays or a folded tablecloth.

A drawer build suits items you reach for while setting the table, because the drawer slides out at the front of the bench. Drawers need a clear run in front of the bench, so they fit where the open side faces the room. A corner return with a drawer can be hard to reach, so keep deep drawers on the long arm.

A lift-up seat needs the table pulled away or the cushion lifted before the lid opens. A front panel that hinges down gives a similar box without lifting the seat. Decide which motion your room allows, then draw the swing of each panel on the plan.

Plan the build and the fixings

A DIY corner dining bench with storage is a box frame with a braced seat and a hinged or sliding access panel. The frame carries the seat load, so the sides and the corner post need fixing into wall studs where the wall is sound.

The build starts with a ladder frame for the seat, then a box below it for storage. A fixed back rail along each wall keeps the bench square and spreads the load. A corner brace inside the box stops the two arms from spreading under weight.

Fixing a bench to a wall can affect wiring and pipes inside that wall. A job that involves cutting into a wall, drilling near services or building a seat that carries several people is one for a trained carpenter. Ask for the fixing method before the frame is closed in.

Keep the table clear to sit down

The table edge and the bench front must leave room for a person to step in and sit down. The clear zone sits on the open side of the table, opposite the bench, and it needs to be wider than the bench seat depth.

Chairs on the open side slide back into that zone, so the table cannot sit tight to the bench front. A table pushed against the bench gives more space on the open side but traps the diners along the wall. Keep a gap between the bench and the table so plates can pass and knees fit.

Mark the swing of drawers and lids on the plan, then check that each panel opens with the chairs in place. A storage bench that opens into a walking route turns a tidy corner into an obstacle. Move the access to the end of the run if the front stays blocked.

Compare bench layouts for a dining corner

An L-shaped corner bench with storage fills both walls and seats diners along two sides of the table. The corner seat is the deepest and the most awkward to leave, so it suits a diner who stays seated through the meal.

A straight storage bench along one wall leaves the corner open for a chair or a plant. This layout fits narrow rooms where two full walls of bench would crowd the table. Storage stays in one long box under the seat.

A bench paired with loose chairs gives flexibility for guests and for moving the table. The storage sits in the bench, and the chairs tuck under the table on the open sides. Choose the layout that matches the walking route, not the one that fills the corner.

LayoutSeats along wallsWhere storage sitsRoom shape it suits
L-shaped banquetteTwo walls plus the cornerLong box under both armsSquare corner beside a wall
Straight benchOne wallOne long box under the seatNarrow room with one free wall
Bench with loose chairsOne wallBox under the benchRoom that needs flexible seating

Build in comfort and easy cleaning

A seat cushion softens a corner bench and raises the seat height by its own thickness. Measure the cushion before fixing the seat frame, then cut the frame lower by that amount so the finished seat sits right at the table.

Crumbs collect in the join between the bench and the wall, so seal that line or leave a small gap you can sweep. A removable cushion with a washable cover makes the bench easier to keep clean around the dining table.

Storage boxes need a little airflow to stop musty smells in a closed corner. A vent hole in a hidden panel or a gap under the lid helps. Label the boxes inside so the lift-up lid stays a quick stop rather than a search.

Corner dining bench questions

What is a corner bench with storage for a dining table?

A corner bench with storage is a fixed seat that runs along one or two walls beside a dining table, with a box or drawers built under the seat. It replaces loose chairs on the wall side and uses the space below the seat for dining items. The bench front faces the table, and the open side of the table stays free for stepping in.

How deep should a corner dining bench with storage be?

Bench depth is set by the seat you want and the storage box below it, so the inner frame depth follows the item you plan to store. A shallow drawer build needs less depth than a lift-up box for bulky goods. Check the depth against the table and the chair backs before you cut the frame.

Should the storage open with a lid or a drawer?

A lift-up lid suits bulky items you store for a season, and a front drawer suits items you reach for while setting the table. The lid needs the table or the cushion moved before it opens. A drawer needs clear floor in front of the bench, so the open side of the corner decides which build fits.

Can I build a DIY corner dining bench with storage myself?

A basic box bench with a hinged seat can be built by a careful DIY woodworker using a ladder frame, a storage box and a corner brace. Any work that cuts into a wall, drills near wiring or pipes, or carries several seated people should go to a trained carpenter. Ask about the wall fixings before the frame is closed.

How much space do I need between the bench and the table?

The gap between the bench front and the table edge depends on the table height and the cushion thickness, so measure it with the finished seat in place. Knees and plates need room, and the diners along the wall must be able to slide in. Keep the open side of the table wider than the bench seat depth for stepping in and out.

Latest articles