# Tightening Loose Furniture Hardware

Learn how to tighten loose furniture hardware safely, from hinges and brackets to stripped screw holes, and keep joints firm before small wobbles turn into damage.

Tightening loose furniture hardware brings a wobbly chair, cabinet door or table back to firm use. The job means matching the tool to the fastener, checking every joint and knowing when a hole needs repair rather than another turn of the screw. A slow pass over the whole piece finds the fasteners that caused the movement and the ones that will loosen next. 

## Match the tool to each fastener 

Loose furniture hardware loosens faster when a screwdriver or Allen wrench does not fit the screw head. A driver that is too small rounds the slot and turns a simple tightening into a repair. Press the driver fully into the head and turn clockwise with steady pressure until the fastener feels firm. Stop at firm contact, since over-tightening crushes the wood around a hinge or bracket and starts a new wobble. 

## How stripped screw holes are repaired 

A screw that spins without gripping sits in a stripped screw hole, and tightening it again will not hold. Fill the hole with wood glue and tap in a dowel cut flush with the surface, then let the glue set. Drill a small pilot hole into the dowel and drive the screw back in with light pressure. This wood glue and dowel repair restores the grip that the original wood lost. 

## Checking joints before you tighten 

Checking joints first tells you where the movement starts, so you tighten the right fastener instead of every screw in sight. Rock the piece gently while a second person watches the corners and the hinge plates. A joint that moves as a unit may need a bolt or cam fitting turned, not just a screwdriver. Where a corner has opened or a bracket has bent, a trained furniture repair specialist should assess the damage before you force anything. 

## Questions About Loose Furniture Hardware 

### How do I tighten loose furniture hardware? 

Tightening loose furniture hardware starts with the right driver pressed firmly into each screw head. Turn clockwise until the fastener feels firm, then move to the next one and check the joints again. Work in a slow pass around the piece so you do not crush the wood around a hinge or bracket. A screw that still spins needs hole repair rather than more force. 

### What should I do with a stripped screw hole in furniture? 

A stripped screw hole needs filling before the screw can hold again. Wood glue and a dowel tapped into the hole restore solid material for the threads to grip. Cut the dowel flush, let the glue set, then drill a small pilot hole. Drive the screw back in with light pressure so the repair holds. 

### Should I use a thread locker on furniture screws? 

A thread locker helps a metal screw stay seated where vibration keeps loosening it. Use the removable grade on a machine screw or bolt, never on a wood screw driven into the board. Apply a small drop to the threads and tighten as normal. Check the joint later, since the locker slows loosening but does not replace a proper fit. 

### How do I stop a hinge or bracket from loosening again? 

A hinge or bracket loosens again when its screws sit in soft or crushed wood. Tighten the screws firmly once, then watch the plate for movement over the next few days. If the screws spin, repair the holes with glue and a dowel. Replace a bent bracket rather than bending it back, because a distorted plate will not sit flat.
