# Standard Window Blind Sizes and Size Chart in Inches

Learn how blind width and drop are recorded in inches, how inside and outside mounts differ, and how to read a blind size chart before ordering.

Window blind sizes are given as a width and a drop, both recorded in inches. The width is measured across the window and the drop runs from top to bottom. A blind size chart simply shows those two figures side by side for each opening or each stock size. 

- Record width first and drop second, always in inches.
- Measure the window recess at several points and use the smallest width.
- Inside mount blinds sit within the recess; outside mount blinds overlap the wall.
- Order the blind size, not the window size, when a chart lists stock blinds.
- A size chart PDF is only a reference; your own measurements decide the final figure.
 

## What a blind size actually records 

A blind size is a pair of measurements written as width by drop, both in inches. The blind width is the horizontal span the blind covers, and the blind drop is the vertical distance it travels. Keeping that order avoids confusion when you compare figures on a chart. 

Imperial measurements are standard for blinds in many markets, so sizes appear in inches rather than centimeters. A size chart in inches removes the need to convert, which lowers the risk of a decimal slip. Write every figure in the same unit before you start comparing options. 

The size you order is not always the size of the window. An inside mount blind is cut slightly narrower than the recess, while an outside mount blind is wider than the opening. A chart lists the finished blind, so check which figure each column describes. 
| Term | What it measures | Unit | 
| Blind width | Horizontal span the blind covers | Inches | 
| Blind drop | Vertical travel from headrail to bottom | Inches | 
| Window recess | Opening between the reveals | Inches | 
| Finished blind | Size of the product you receive | Inches |  

## Reading a blind size chart in inches 

A blind size chart in inches pairs each listed width with a matching drop, so you can match an opening to a stock size. Charts may be arranged as rows of widths or as a grid of width against drop. Read the column headings before you pick a figure. 

Some charts list nominal sizes that cover a range of openings, and others list exact finished sizes. A nominal chart tells you the window span a blind suits, while an exact chart tells you the product dimensions. Mixing the two leads to a blind that misses the recess by a wide margin. 

Keep a copy of the chart you used with your measurements. A window blind size chart PDF is easy to print and mark up, and it gives you a record of the figures you compared. Save the version that matches the product line you are considering. 

## Measuring width and drop in the recess 

Measuring the window recess takes three width readings and three drop readings, because openings are rarely square. Take each width at the top, middle and bottom of the recess. Take each drop at the left, center and right. 

Use the smallest width and the smallest drop for an inside mount blind, so the blind clears the tightest point. Note any handles, vents or tiles that narrow the opening. A frame or a protruding sill can change the usable depth as well. 

Record every reading in inches to the nearest eighth and label each one. A blind size chart with pictures helps here, because the drawings show exactly which faces the tape should touch. Photographs of the recess with the tape in place back up your notes. 

## Inside mount versus outside mount sizes 

An inside mount blind fits within the window recess and leaves the sill and trim visible. Its width is the recess width less a small clearance at each side, which the product instructions state. The drop runs from the headrail position to the sill or floor. 

An outside mount blind overlaps the wall around the opening, which hides gaps and gives more coverage. Its width extends past the recess on both sides, and its drop extends above and below the opening. Extra overlap improves privacy and light control at the edges. 

The mount decides which number you enter on a size chart. Inside mount figures follow the recess, while outside mount figures add the overlap you want. Write the mount type on your measurement sheet before you match anything to a chart. 

## Stock sizes against made-to-measure 

Stock blinds come in a set of listed widths and drops, and made-to-measure blinds are cut to your figures. A chart of standard blind widths shows the stock options for a product line. Standard blind drops follow the same idea for the vertical measurement. 

Stock sizes suit an opening that matches a listed figure closely, and they limit your choice to what the chart holds. Made-to-measure sizes fit the recess you have, and they cost more because each blind is produced for one window. Neither option removes the need for careful measuring. 

Check whether a stock blind can be trimmed at the bottom or the sides before you commit. Some products allow shortening, and others do not, so the product instructions decide. A size chart tells you what exists, not what can be altered. 

## Common mistakes when matching a chart 

Reading a chart before measuring is the source of many sizing errors, because the numbers start to lead the tape. Measure the window first and write the figures down. Open the chart afterward and look for the nearest listed size. 

Confusing width with drop puts a blind in the wrong orientation, and the error shows up only at the window. Repeating the order width then drop on every note keeps the two figures apart. A quick read-back of each line catches a swapped pair before you order. 

Ignoring the mounting hardware is another trap, since brackets take up space inside a shallow recess. Check the depth the product needs against the depth you measured. Where the recess is too shallow for an inside mount, an outside mount solves the fit. 

## Working from the chart to the final order 

Match your smallest width and smallest drop to the chart, then confirm the mount type and the product line. A blind size chart in inches should be read with the product instructions open beside it. The instructions name the clearance and the depth each blind needs. 

Write the finished width, the finished drop, the mount type and the room on one line. A short note per window keeps a multi-room order in order. Include the date you measured so you can tell old notes from new ones. 

Check the delivered labels against that line before installation begins. A mismatch is easier to resolve before the brackets go on the wall. Keep the measurement sheet with the chart for any future window in the same room. 

## Window Blind Size Questions 

### What is the difference between blind width and blind drop? 

Blind width is the horizontal span the blind covers, and blind drop is the vertical distance from the top to the bottom. Both are written in inches on a size chart. The width comes first in the pair, so a chart entry reads width by drop. 

### How do I use a window blind size chart in inches? 

A window blind size chart in inches lists finished widths with matching drops, and you compare your measured figures against those entries. Measure the window first, then find the nearest listed size for the mount type you plan. Confirm from the product instructions whether the listed figure is the window span or the finished blind. 

### Should I order the window size or the blind size? 

Order the blind size, because the finished blind differs from the window opening for both mount types. An inside mount blind is slightly narrower than the recess, and an outside mount blind is wider than the opening. A chart usually lists the finished product, so read the headings with care. 

### Can I get a printable blind size chart as a PDF? 

Yes, many retailers and manufacturers publish a window blind size chart as a PDF you can print and keep with your notes. A printed chart lets you mark the sizes you compared and record your own measurements beside them. Check that the file matches the product line you intend to order. 

### What measurements do I take before checking a size chart? 

Take three width readings at the top, middle and bottom of the recess, plus three drop readings at the left, center and right. Use the smallest figures for an inside mount so the blind clears the tightest point. Note the mount type, the recess depth and any obstructions before you open the chart.
