# Self Healing Cutting Mat for Sewing and Quilting

How a self healing cutting mat works for sewing and quilting, how to cut fabric on it with a rotary cutter and ruler, and what grid markings do.

A self healing cutting mat is a dense synthetic surface that closes over the shallow slits a blade leaves behind, which keeps the mat flat and usable for sewing and quilting work. The mat pairs with a rotary cutter and a quilting ruler to cut fabric cleanly, and its grid markings let you measure pieces without a separate guide. This page explains how the mat behaves, how to cut fabric on it, and how to keep it working. 

## How a self healing surface works 

A self healing mat is made from layers of a flexible polymer that press back together after a blade passes through. The surface stays level because the slit closes rather than staying open as a groove. A mat with an open cut lets the fabric dip into the gap, which spoils a straight cut. The material has a limit, so rotating the mat and cutting in different directions spreads the wear. 

## Cutting fabric on the mat 

Cut fabric on a cutting mat by laying the cloth flat, pressing a quilting ruler on the line you want, and drawing a rotary cutter along the ruler edge. Keep the blade against the ruler and roll the cutter away from your body with steady pressure. Cut in one pass where the fabric allows, because a second pass can shift the cloth. A rotary cutter blade is sharp, so keep your fingers behind the ruler and store the cutter closed. 

## Reading the grid markings 

Grid markings on a fabric cutting mat give you a measured surface with angle lines and a marked edge for lining up a quilting ruler. The grid lets you place a strip or square against a printed line and cut to size without measuring twice on the fabric. Check that the grid suits your units, since mats are printed in different measuring systems. A clear grid helps you square a corner and keep repeated pieces the same size. 

## Questions about self healing cutting mats 

### Can I use a self healing cutting mat for sewing as well as quilting? 

Yes, a self healing cutting mat works for both sewing and quilting because both tasks need a flat, measured surface to cut fabric and pattern pieces. Quilting relies on the grid for strips and squares, while general sewing uses the mat for trimming seams and shaping pieces. The same rotary cutter and ruler serve both jobs. Keep the mat for cutting only, since pins and needles can mark the surface. 

### How do I cut fabric on a cutting mat without slipping? 

Cut fabric on a cutting mat without slipping by pressing the quilting ruler firmly with your spread hand and rolling the rotary cutter along its edge. Place the fabric so the grain or a marked line follows the grid before you cut. A smooth, steady roll beats a fast push, which can drag the cloth. Replace a dull blade, because a dull cutter needs more force and shifts the fabric. 

### Does a self healing mat stay flat after many cuts? 

A self healing cutting mat stays flat as long as the polymer closes over the slits, and turning the mat between sessions helps it recover. Deep or repeated cuts in one line wear the surface and can leave a groove that catches fabric. Store the mat flat rather than rolled or folded, and keep it away from strong heat. How long the surface lasts depends on the blade sharpness and how often you cut. 

### What should I put under a sewing cutting mat? 

A sewing cutting mat sits on a hard, flat table so the mat cannot flex while you press the ruler and roll the cutter. A soft or uneven surface lets the mat bow, which changes the cut angle and dulls the blade faster. Keep the table clear around the mat so fabric does not drag on an edge. A mat that curls at the corner can be flattened under a flat weight between uses.
