# Roller Blind Sizes: Standard Widths and Drop Lengths

Learn how roller blind width and drop are measured, how tube size affects the roll, and when to choose an inside or outside mount for your window.

Roller blind sizes come from two measurements: the width across the window and the drop from the top of the roll to the bottom bar. A roller blind is made to your measured width and drop rather than sold in fixed standard sizes, so the numbers you take decide how the blind fits and rolls. The pages below explain how width and drop are measured, how the mounting position changes each figure, and what the roller tube has to do with the space the fabric needs. 

## How width and drop are measured 

Roller blind width is the horizontal measurement of the window opening or of the surface the blind fixes to. Roller blind drop is the vertical measurement from the headrail down to where the fabric should end. Take each figure at more than one point, because window openings are rarely perfectly square. The blind is then cut to those two numbers, so a small error in either one shows in the finished fit. 

## Inside mount versus outside mount 

An inside mount roller blind sits within the window recess and is measured to the narrowest part of that recess. An outside mount roller blind fixes to the wall or frame around the window and needs extra width and drop to cover the opening. The mounting choice changes the figures you write down before ordering. Measure the surface the brackets will actually sit on, not the glass. 

## What tube size does to the roll 

The roller tube is the cylinder the fabric wraps around, and its diameter sets how much fabric gathers at the top. A larger tube holds a longer drop in fewer turns and keeps a wide blind steadier. Tube size also limits how much fabric a narrow width can carry. Check the tube diameter the maker specifies for your width and drop before you finalize the order. 

## Questions about roller blind sizes 

### Are roller blinds sold in standard widths? 

Roller blinds are made to measure, so there is no universal set of standard widths to pick from. You supply the width and the drop, and the maker cuts the fabric and tube to those figures. Retailers may offer a range of ready-made sizes, but a made-to-measure blind follows your own measurements. Measure your window and order to that number. 

### How do I measure the drop for a roller blind? 

Measure the drop from the point where the headrail will sit down to the sill or to the height you want the fabric to reach. For an inside mount, take the drop inside the recess. For an outside mount, add the overlap you want below the opening. Write the figure down before you order, since the drop is cut to it. 

### Does the tube size change the blind size I need? 

Tube size does not change the width or drop you measure, but it affects how the finished blind rolls. A larger tube takes up more space at the top and suits a longer drop on a wide blind. The maker pairs a tube diameter with your dimensions. Confirm that pairing before ordering. 

### Should I choose an inside or outside mount? 

An inside mount roller blind fits within the recess and gives a neat line at the window. An outside mount covers the opening and the surrounding frame, which suits a recess too shallow for brackets. Choose by the depth of your recess and how much light you want to block. Then measure the surface the brackets will use.
