# Kitchen Furnishing Checklist

Use this kitchen furnishing checklist to measure the room, plan the work triangle, place appliances and choose cabinets, seating and storage in order.

A kitchen furnishing checklist follows the order the room gets built, starting with measurements. Appliances and cabinets come next, then counters, seating, lighting and the small storage pieces. Working in that order keeps a table or stool from blocking a dishwasher door you forgot to measure. 

- Measure walls, openings, ceiling height and every utility point before buying anything.
- Place the sink, cooktop and refrigerator first, then let cabinets fill around them.
- Check that every appliance door and drawer opens fully without hitting another.
- Choose seating only after aisle clearances are drawn on the plan.
- Leave gas, plumbing and electrical connections to trained installers.
 

## Measure the room before buying any furniture 

Kitchen layout measurements come first because every cabinet, appliance and stool must fit the real room. Measure each wall at floor level, at counter height and near the ceiling. Walls are rarely perfectly straight, so the smallest reading is the safe one to plan with. 

Openings and fixed points shape a kitchen plan as much as wall length does. Mark windows, doors, radiators, vents and the swing direction of every door on a sketch. Note the exact position of the sink drain, water lines, gas supply and electrical outlets. Moving any of these points costs time and money, so plan around them where possible. 

A scaled drawing turns kitchen measurements into a plan you can test before ordering. Graph paper or a free drawing app both work if every item keeps the same scale. Draw furniture footprints as rectangles that include door swings and the space a person needs. Mistakes found on paper are far easier to fix than mistakes found on delivery day. 

- Wall lengths at three heights
- Ceiling height and any boxed-in soffits or beams
- Window and door positions with swing direction
- Sink drain and water supply locations
- Gas line and electrical outlet positions
- Floor level changes and radiator or vent locations
 

## Set the work triangle and layout shape 

The work triangle links the sink, the cooktop and the refrigerator, the three points a cook uses most. A general design guideline keeps each leg between about 4 and 9 feet, or 1.2 to 2.7 meters. Shorter legs crowd the cook, while longer legs add steps to every meal. No tall cabinet or traffic path should cut straight through the triangle. 

Kitchen layout shape decides how the triangle sits within the room. A one-wall kitchen places everything in a line, which suits narrow rooms and open plans. A galley kitchen has two parallel runs facing each other across a single aisle. L-shaped and U-shaped layouts wrap the work points around one or two corners. 

Larger kitchens can split the triangle into work zones for prep, cooking, cleaning and storage. Zoning helps when two people cook together or when an island holds a second sink. Each zone should keep its own tools and counter space within reach. The triangle still guides where the three main points sit relative to each other. 

## Place appliances so every door opens fully 

Appliance placement starts with the refrigerator, range and dishwasher, since each needs fixed connections. The dishwasher belongs next to the sink to keep drain and water lines short. The refrigerator suits the end of a run, where its height does not split the counter. A range or cooktop needs counter space on both sides for pans and utensils. 

Door swings cause many kitchen layout clashes, so check each appliance door in its open position. A dishwasher door folds down into the aisle and can block an opposite drawer. Corner placements often stop a refrigerator door or an oven door from opening fully. Draw each open door on the plan and confirm a person can stand beside it. 

Gas, water and electrical connections for appliances need a trained installer, not a weekend attempt. Faulty gas or wiring work can cause fires, leaks or injury. Ventilation for a range hood also needs a duct route that a professional can confirm. Share your scaled plan with the installer before any appliance is ordered. 

## Choose cabinets and storage to fit the plan 

Cabinets and storage fill the space between appliances once those fixed points are drawn. Base cabinets sit on the floor and carry the countertop, while wall cabinets hang above it. Tall cabinets, also called pantry units, hold food, brooms or a built-in oven. Base cabinet depth is about 24 inches, or 61 centimeters, which sets the counter depth. 

Drawers in base cabinets make deep storage easier to reach than shelves behind doors. Corner cabinets need a carousel or pull-out fitting so the back space stays usable. Store items near where they are used, such as pans beside the cooktop. Plates and glasses work well in a drawer or cabinet near the dishwasher. 

Wall cabinet height depends on the users and the counter height below. A general guideline leaves about 18 inches, or 46 centimeters, between counter and wall cabinet. Ceiling height decides whether cabinets stop short, reach the ceiling or leave room for display. Open shelves can replace some wall cabinets where a lighter look matters more than closed storage. 

## Plan counters, aisles and walking space 

Kitchen counter space matters most beside the sink, beside the cooktop and in one continuous prep area. A clear run of counter between sink and cooktop handles chopping, mixing and plating. Landing space, a free strip of counter next to the refrigerator and oven, holds hot or heavy items. 

Aisle width between counters decides whether the kitchen feels workable or cramped. A general guideline allows about 42 inches, or 107 centimeters, for one cook. Two cooks working together need closer to 48 inches, or 122 centimeters. Narrower aisles can work in small rooms if appliance doors do not face each other. 

Traffic paths through the kitchen should avoid the space between the sink, cooktop and refrigerator. A route from the back door to a dining area should pass beside the work zone. Doors into the kitchen should not swing into an open dishwasher or oven. Moving a door hinge or using a sliding door can free up a cramped corner. 

## Fit seating, tables and islands last 

Kitchen seating comes after cabinets, because chairs and stools need clear space behind them. A seated person pushing back from a counter needs about 36 inches, or 91 centimeters. Where people walk behind the seats, that clearance grows to roughly 44 inches, or 112 centimeters. Without that room, seating blocks the work zone or the main walking path. 

Kitchen seat height must match the surface it serves, or knees and backs suffer. Counter-height surfaces pair with counter stools, while taller bar surfaces need bar stools. Dining tables at regular table height pair with ordinary dining chairs. Each seat also needs about 24 inches, or 61 centimeters, of surface width. 

A kitchen island earns its place only when aisles around it stay wide enough on every side. Islands can hold seating, storage, a cooktop or a second sink. A small kitchen may suit a narrow cart or wall-mounted drop-leaf table better. Drop-leaf tables fold down when not in use, which frees floor space between meals. 

## The complete kitchen furniture list in order 

A kitchen furniture list in buying order keeps each choice tied to measurements already fixed. Furnishing a kitchen in that sequence reduces returns, gaps and pieces that do not fit. Large fixed items come first, followed by surfaces, seating and finishing pieces. 

Kitchen lighting belongs on the furnishing checklist alongside furniture, since each work zone needs its own light. Ceiling lights give general light, while under-cabinet lights brighten the counter where you cut. Pendants over an island or table add focused light at the eating spot. Any new wiring for these fixtures needs a qualified electrician to install it safely. 

Small kitchen pieces finish the room once large items are in place. Bins for trash and recycling need a planned spot, ideally inside a base cabinet near the sink. A step stool helps reach the top shelves of tall cabinets. Rugs, curtains and wall hooks come last, after every door swing is checked. 

- Measurements and scaled plan
- Refrigerator, range or cooktop, oven and dishwasher
- Range hood and ventilation route
- Base, wall and tall cabinets with fittings
- Countertops and backsplash
- Lighting for ceiling, counters and table
- Seating, table or island
- Bins, step stool, rugs and accessories
 

## Kitchen furnishing questions answered 

### What do you buy first for a new kitchen? 

Appliances come first for a new kitchen, right after the room is measured. Appliance sizes and connection points decide where cabinets can go. Seating, lighting and accessories wait until those fixed items sit on the plan. 

### Does the work triangle still apply to open kitchens? 

Yes, the kitchen work triangle still applies in open plans, though islands and zones change its shape. The sink, cooktop and refrigerator should stay within easy reach of each other. Living-room traffic should pass outside the triangle rather than through it. 

### Do you need an island in your kitchen? 

No, a kitchen island is optional and only suits rooms with clear space around it. An island needs a working aisle on every side, not just in front. A peninsula, a counter run attached at one end, can add workspace in a smaller room. 

### Should kitchen cabinets go all the way to the ceiling? 

Yes, kitchen cabinets can go to the ceiling, which adds storage and removes a dust-catching gap on top. The highest shelves then need a step stool, so they suit rarely used items. Ceiling height and budget decide whether full-height cabinets make sense. 

### Can you install kitchen appliances yourself? 

You can place freestanding kitchen appliances that plug into an existing outlet yourself. Gas ranges, hardwired ovens and plumbed dishwashers need a trained installer. Faulty gas, water or electrical connections can cause leaks, fires or injury.
