# Inside Mount vs Outside Mount Blinds: Which to Choose

Learn how inside mount and outside mount blinds differ, how window recess and frame depth decide the choice, and how to measure width and height for either fit.

Inside mount versus outside mount blinds comes down to where the blind sits: inside mount fits within the window recess, while outside mount covers the wall or frame around the opening. The right choice depends on frame depth, how much light gap you can accept, and any obstructions near the window. This page explains both fits and shows how to decide for your own window. 

## What inside mount blinds require 

Inside mount blinds sit within the window recess, so the headrail and brackets stay flush with the wall face. A deep enough window recess is required for the brackets to hold, and the blind needs clearance so the slats or fabric do not rub the frame. Measure the width at the top, middle and bottom of the recess and use the narrowest reading for the blind width. Measure the height in the same way and use the longest reading for the drop. 

## How outside mount blinds work 

Outside mount blinds attach to the window frame face or the wall above the opening and cover the recess completely. This fit suits shallow window recesses where an inside mount bracket would not hold. An outside mount also reduces light gaps at the edges because the blind overlaps the opening. Measure the width and height you want the blind to cover, then add the overlap on each side to the bracket position. 

## Light gaps, obstructions and measuring 

Light gaps appear at the sides, top and bottom of any blind, but an inside mount shows them more because the blind sits within the opening. Window handles, cranks or deep frame depth can block an inside mount, while outside mount blinds clear these by sitting proud of the frame. Check mounting brackets against the frame depth before ordering. Measure width and height to the nearest point your chosen fit needs, then confirm the bracket type suits that surface. 

## Inside Mount and Outside Mount Questions 

### Should I choose inside mount or outside mount blinds? 

The choice between inside mount and outside mount blinds depends on your window recess depth and how you want the blind to sit. An inside mount suits a recess deep enough to hold brackets and gives a flush finish. An outside mount suits a shallow recess or a window where you want fuller coverage of the opening. 

### How do I measure for inside mount versus outside mount blinds? 

Measuring for inside mount and outside mount blinds uses different reference points. For an inside mount, measure the width and height inside the window recess and take the narrowest width and longest height. For an outside mount, measure the frame or wall area you want covered and add overlap on each side. 

### Do outside mount blinds reduce light gaps? 

Outside mount blinds can reduce light gaps because the blind overlaps the window opening rather than sitting within it. An inside mount blind leaves a gap at each edge where the recess meets the frame. The overlap of an outside mount covers those edges, though some light can still pass around the sides. 

### What if my window recess is too shallow for inside mount blinds? 

A window recess that is too shallow for inside mount blinds will not hold the brackets securely. In that case an outside mount is the practical option because the brackets attach to the frame face or wall. Confirm the mounting surface can take screws, and ask a trained installer if the frame material is uncertain.
