# How to Replace a Stylus Tip

Learn how to replace a stylus tip: remove the old pen tip, check tip threading and diameter, fit the new stylus nib, and keep your drawing stylus working.

Replacing a stylus tip means removing the worn nib from the pen barrel and fitting a matching replacement so the drawing stylus tracks cleanly again. The job depends on how your tip attaches, since some screw in by tip threading and others pull out of a socket. Work gently, match the tip diameter and type, and stop if the barrel or socket shows damage. 

## Remove the old pen tip 

Pen tip removal starts with knowing whether your stylus uses a threaded nib or a push-fit rubber tip. A threaded nib unscrews counterclockwise from the barrel, while a push-fit tip pulls straight out of its socket. Grip the tip close to the barrel and turn or pull slowly to avoid twisting the internal shaft. If the tip will not move, stop rather than forcing it, because the socket can crack. 

## Match threading and tip diameter 

A replacement stylus pen tip must match the original in thread size, tip diameter and material. Tip threading differs between models, so a nib that looks similar may not seat correctly in the barrel. Measure the old tip or compare it side by side with the replacement before fitting. A rubber tip for a finger-style stylus is not interchangeable with a hard drawing nib. 

## Fit and test the new nib 

Screw or push the new stylus nib in until it sits flush with the barrel, then test it on a spare surface. A correctly fitted tip should feel firm, with no wobble and no gap at the joint. Check that the tablet or drawing surface responds evenly across the screen before you rely on the stylus. Tablet stylus maintenance includes keeping the tip clean and replacing it when it flattens or tears. 

## Questions about stylus tip replacement 

### How do you change a stylus tip? 

Changing a stylus tip means removing the worn nib and fitting a matching replacement into the barrel. Unscrew a threaded tip counterclockwise or pull a push-fit tip straight out, depending on the model. Seat the new tip firmly and test it before drawing again. 

### Can I use any replacement pen tips on my stylus? 

No, replacement pen tips must match the thread, diameter and material of your stylus model. A tip with the wrong threading will not seat, and an oversized nib can damage the socket. Compare the old tip with the replacement before buying. 

### How do I know which replacement stylus tips fit? 

Replacement stylus tips fit when their threading, length and tip diameter match the original nib. Keep the old tip and compare it with the new one, or note the stylus model when ordering. A supplier listing the model number is the safest match. 

### What is a stylus nib and how does it differ from a rubber tip? 

A stylus nib is the small pointed tip at the end of a drawing stylus, and it can be threaded or push-fit. A rubber tip is a softer rounded end fitted to some touch styluses. The two serve different pens and are not swapped between them.
