# How to Measure a Room for a Wall Bed or Murphy Bed, Including Clearance to Fold Down

Measure your room for a wall bed or Murphy bed: wall length and height, open and closed depth, and the floor clearance the bed needs to fold down safely.

Measuring a room for a wall bed or Murphy bed means checking three things: the wall space the cabinet needs when closed, the floor area the bed takes when open, and the clear floor in front that lets the bed fold down. A wall bed, also called a Murphy bed, swings out from the wall, so the open and closed footprint differ and both must fit your room. 

## Measure the wall for the closed cabinet 

The closed wall bed sits against one wall, so measure that wall from corner to corner at floor level. Note the height from floor to ceiling, because the cabinet stands taller than a standard wardrobe and the bed frame must clear any light fitting or trim. Record the width of the wall bed frame and the mattress size it holds, since these set the cabinet width. Leave space at each side for the frame fixings and for any skirting or baseboard that stands proud of the wall. 

## Work out the open bed depth 

An open wall bed projects into the room, so its open depth matters as much as the wall length. Measure from the wall to the foot of the bed frame when it lies flat, and add the thickness of the mattress and bedding at the foot end. The open and closed bed depth are never the same, and the open figure is the one that decides whether the room still works. Mark that footprint on the floor with tape and check it against doors, radiators and other furniture. 

## Check fold-down clearance on the floor 

The fold-down bed needs clear floor in front of the cabinet while it lowers, because the frame sweeps through an arc before it lies flat. Stand where the foot of the bed will land and check that no chair, table or rug edge sits inside that zone. Door and walkway clearance also matter, since a door that swings into the footprint blocks the bed from opening. A clearance calculator is only a guide, so confirm the figure against the maker's own fold-down clearance drawing for your model. 

## Wall bed measuring questions 

### How much space do I need in front of a fold-down bed? 

The space needed in front of a fold-down bed is the open depth of the frame plus a clear margin for the mattress and bedding at the foot. Measure from the wall to the furthest point the bed reaches when flat, and keep that whole strip free of furniture. The exact figure depends on the bed size and the hinge design, so check the maker's fold-down clearance drawing. Do not rely on a generic number for a model you have not checked. 

### What Murphy bed clearance measurements should I take? 

Murphy bed clearance measurements cover the closed wall width and height, the open depth from wall to foot, and the clear floor in the fold-down zone. Add the side clearance for the frame fixings and any skirting, and note the ceiling height above the cabinet. Take each figure twice with a tape measure and write it down before you order. The clearance details that matter depend on the frame design and mattress depth of the model. 

### Can I use a clearance calculator instead of measuring? 

A clearance calculator gives an estimate only, so measure the room yourself before you trust it. Calculators work from the bed size and a standard hinge sweep, while your wall, skirting and ceiling can shift the real figures. Use the calculator as a starting point and then check the maker's own wall bed dimensions. A tape measure on the actual wall settles the question. 

### What ceiling height does a wall bed need? 

The ceiling height for a wall bed depends on the cabinet height of the model, which rises with the mattress size and the frame design. Measure from the floor to the lowest point above the cabinet, such as a light fitting or ceiling rose. The cabinet must stand clear of that point when it is closed and while the bed folds. Check the maker's stated cabinet height against your measurement before you commit.
