# How to Draw a Curved Wall on a Floor Plan

Learn how to draw a curved wall on a floor plan with the arc tool, true wall radius and correct dimensions, then fit furniture around the curve.

Drawing a curved wall on a floor plan means placing an arc between two points and giving it a real radius, so the curve matches the room you measured. You set the center point and radius in your floor plan software, then thicken the arc into a wall of true thickness. The same steps work in a room planner app and in a drafting program. 

- Measure the chord between the two wall ends and the depth of the bulge, then derive the radius before you draw.
- Use the arc tool rather than a series of short straight segments, so the curve stays smooth and editable.
- Dimension the curve with its radius and its chord length, because a straight dimension cannot describe an arc.
- Keep the arc at the wall centerline and offset it by half the wall thickness on each side.
- Check furniture footprints against the curve before you commit, since depth shrinks toward the wall.
 

## Measure the curve before you draw it 

A curved wall on a floor plan starts as a measurement, not as a shape. Stand at the room and measure the straight distance between the two ends of the curve, which is the chord. Then measure the greatest depth from that chord to the face of the wall, which is the rise. 

Those two numbers fix the arc. The wall radius depends on the chord and the rise together, and you can compute it or let the software solve it from three points along the curve. Write the radius on your sketch before you open the computer, because the drawing has to match the room you have. 

Check your scale and measurements against a second feature in the room, such as the opposite wall. A curved wall drawn at the wrong radius throws off every [furniture footprint](/articles/furniture-footprint-define-it-and-plan-with-it/) placed beside it. Correcting the scale first saves you from redrawing the whole plan. 

## Draw the arc between the wall ends 

The arc tool in floor plan software draws a curve through a center point and a radius, or through three points you click. Choose the three-point method when you already measured points along the wall face. Choose the center-and-radius method when you calculated the wall radius from the chord and rise. 

Place the arc so it follows the wall centerline, not the visible face. A wall has thickness, so the centerline is the middle line that the two faces share. Drawing the centerline first keeps the curve consistent when you thicken it later. 

Avoid building the curve from short straight segments. A segmented curve looks smooth at a glance but hides a chain of corners that breaks snapping and dimensioning. One true arc stays editable, and you can change its radius without redrawing the room. 

- Set the drawing scale before placing the arc.
- Mark the two wall ends and at least one point on the curve.
- Draw a single arc through those points.
- Confirm the radius the software reports against your measurement.
 

## Give the arc a real wall thickness 

A curved wall symbol needs thickness to read as a wall rather than a line. Offset the centerline arc by half the wall thickness to each side, which produces an inner face and an outer face. The offset tool in most programs does this in one step. 

Wall thickness affects the [usable floor area](/articles/usable-total-gross-and-covered-floor-area-reading-the-differences-from-existing-floor-plans/) inside the curve. A thick curved wall eats into the room on its concave side, and that loss changes what furniture fits. Set the true thickness from your measurement so the plan stays honest. 

Close the ends of the wall where it meets straight walls. A gap at the junction leaves the curve floating and confuses anyone reading the plan. Trim or extend the offset arcs until the faces meet the adjoining wall cleanly. 

## Dimension a curved wall correctly 

Dimensioning a curved wall uses the radius and the chord length, because a single straight dimension cannot describe an arc. Place a radius dimension from the center point to the centerline, and label the chord between the wall ends. Both numbers together let a builder reproduce the curve. 

Add the rise, the depth from the chord to the deepest point of the curve, as a third check. The rise is easy to verify on site with a string and a tape. Three related numbers make the curve unambiguous on paper. 

Keep dimensions on the centerline so they do not drift as the wall thickness changes. If you move the curve to adjust the room, the radius and chord update, and you can see whether the change still matches the measured room. Review any dimension that no longer agrees with your sketch. 

## Place the curve in the room plan 

Set the curved wall relative to fixed references, such as a straight exterior wall or a doorway. Anchoring the curve to a known line keeps it in place when you move other elements of the plan. A curve placed by eye drifts as the layout develops. 

Connect the curved wall to the straight walls with clean junctions. Check that door and window openings sit on the curve only where the wall has room for the frame. An opening cut into a tight curve leaves too little straight wall for the frame to hold. 

Add the curved wall symbol to your legend if your drawing uses symbols for other walls. A consistent symbol helps anyone reading the plan tell a curve from a bay or a partial partition. Keep the symbol and the drawn wall in agreement. 

## Fit furniture around a curved wall 

Furniture fit around a curved wall depends on the depth of the piece, because the usable space narrows toward the wall. A rectangle placed against a convex face touches at one point, while the corners stand away. Measure the gap at the ends of the piece, not just at the middle. 

Draw the furniture footprint at its true size and rotate it along the curve. A chair or sofa follows the arc only if its back can clear the changing radius. Leave the sweep of any door on the curve free of furniture, since a door swing cannot follow a curve. 

Check storage and built-in units against the curve before ordering. A straight cabinet against a curved wall needs a filler piece or a stepped back, and the plan should show that gap. Furniture that ignores the curve looks wrong on the plan and fails on site. 

## Work cleanly in a room planner app 

A room planner app can draw a curved wall, but the workflow differs from a drafting program. Some apps build a curve from a chain of short segments, which is hard to dimension. Check whether the app shows a radius value before you rely on it. 

Keep one master version of the plan at the measured scale. When you test furniture arrangements in a floor plan creator, copy the file rather than editing the original. A trial layout can quietly move walls, and the master file protects your measured curve. 

Export the finished plan with its dimensions if the app allows it. The curve means little to anyone else without its radius and chord. A plan that travels with its numbers can be checked and built. 

## Check the plan before you build 

A finished curved wall plan carries the radius, the chord, the rise and the wall thickness on the drawing. Read the plan against your original sketch and confirm every number matches the room. Any mismatch points to a scale error or a misplaced arc. 

Walk the plan in your head from the doorway and check that openings, furniture and the curve work together. Confirm that the curve closes onto the straight walls at both ends. Confirm that no opening sits in a section too curved to frame. 

Treat the structural side of a curved wall as a job for a trained specialist. Whether a curved wall can be removed or built needs an engineer or a building professional to decide. Your floor plan records the geometry, and it does not replace that assessment. 

## Questions about drawing curved walls 

### Can a floor plan creator draw a curved wall? 

Yes, most floor plan creators include an arc or curve tool that draws a curved wall from a center point and radius or from points along the curve. Check that the tool reports a radius value, because a curve without a number is hard to dimension or build. A few apps only fake the curve with short segments. 

### What is a curved wall symbol on a floor plan? 

A curved wall symbol is the drawn representation of a wall that bends, shown as an arc rather than a straight line. It usually carries two offset lines for the wall faces and a centerline for dimensions. Keep the symbol consistent with the other wall symbols in your drawing. 

### How do I dimension a curved wall? 

Dimension a curved wall with the radius and the chord length, then add the rise from the chord to the deepest part of the curve. A single straight dimension cannot describe an arc. The three numbers together let someone reproduce the curve on site. 

### How do I fit furniture around a curved wall? 

Fitting furniture around a curved wall starts with the footprint of each piece at true size, rotated along the arc. The usable depth narrows toward a convex face, so measure the gap at the ends of the piece as well as the middle. Leave door swings clear, since a swing cannot follow a curve. 

### What is a wall radius and why does it matter? 

The wall radius is the distance from the center of the arc to the wall centerline, and it sets how tight the curve turns. A tight radius leaves little straight wall for door and window frames. The radius belongs on the plan because a curve without it cannot be built. 

### Should I use straight segments to draw a curve? 

No, a chain of short straight segments breaks snapping and dimensioning even when it looks smooth. One true arc stays editable, and you can change its radius without redrawing the room. Use segments only if your software has no arc tool at all.
