# How to Clean Measuring Tools and Equipment

Learn how to clean measuring tools and equipment, from wiping a tape measure blade to removing rust and keeping rulers and levels ready for accurate layout work.

Cleaning measuring tools and equipment means wiping dust and grit from a tape measure and its blade, then cleaning rulers and levels with a damp cloth and mild soap before drying them completely. A clean tape measure retracts smoothly, a clean straightedge sits flat, and a clean level reads true. The steps below cover the cloths and cleaning materials to use, how to treat a dirty or rusty tape measure, and how to keep measuring tape hygiene in a layout workspace. 

## Wiping down a tape measure 

A tape measure collects dust, plaster and grit along the blade and inside the case opening. Pull the blade out a short length and wipe both faces with a dry cloth or a lightly damp cloth with mild soap. Let the blade dry fully before it retracts, because moisture carried back inside the case can start rust on the spring. Wipe the case and the lock button with the same cloth and keep water away from the housing. 

## Cleaning rulers and levels 

Rulers, squares and levels carry pencil marks, adhesive residue and workshop film on their edges and faces. A damp cloth with mild soap lifts most of it, and a dry cloth removes the soap film afterward. Pay attention to the vial windows on a level, where dust dulls the bubble reading, and to the marked edge of a ruler. Do not soak a level or a wooden rule, since water can loosen the vials or warp the stock. 

## Rust removal and light lubrication 

Rust on a tape measure blade or a steel rule comes off with a fine abrasive pad worked along the metal, followed by a dry cloth. A light film of lubricant on the blade helps it slide and pushes moisture away, but too much lubricant attracts grit. Apply lubricant sparingly and wipe off the excess, and keep oil away from the printed graduations. If rust has pitted the metal or reached the spring inside the case, a trained repair specialist should assess the tool. 

## Questions about cleaning measuring tools 

### How do you clean a dirty tape measure? 

A dirty tape measure is cleaned by extending the blade and wiping both sides with a dry cloth or a damp cloth with mild soap. Wipe the case and the lock with the same cloth, then let the blade dry before it retracts. For sticky residue on the blade, use a cloth dampened with mild soap and finish with a dry wipe. Wiping down the tape measure after each job keeps grit out of the case. 

### How do you clean rust off a tape measure? 

Rust comes off a tape measure with a fine abrasive pad rubbed along the blade, then a dry cloth to remove the dust. A thin coat of lubricant applied afterward and wiped down helps protect the metal from moisture. Check the blade for pitting before you retract it, because rough spots catch on the case opening. Rust inside the case or on the spring needs a trained repair specialist rather than a home fix. 

### What is the best way to clean a tape measure? 

The reliable way to clean a tape measure is a dry cloth for dust and a lightly damp cloth with mild soap for grime on the blade. Cleaning the blade in short sections keeps the tape from snapping back with moisture on it. Dry the blade completely and wipe the case and lock button before storing the tool. A clean, dry tape measure gives steadier readings and a smoother retraction. 

### What does measuring tape hygiene involve? 

Measuring tape hygiene means wiping the case and blade between users and after a job in a dusty or dirty space. A cloth with mild soap removes handling film from the case, and a dry cloth follows to leave the surface clean. Keep the tape out of food areas and away from open wounds on the hands. Store the tool closed and clean so grit does not collect inside the housing.
