# How Many Wet Wall Panels You Need

Work out the panel count for wet wall panels from measured wall area, panel coverage and a waste allowance, so you order the right number for your bathroom walls.

How many wet wall panels you need comes from the measured wall area of the room divided by the coverage of one panel, plus a cutting allowance. Wet wall panels are large waterproof sheets used in shower and bath surrounds, and each one covers a set area shown on its packaging. You measure the walls you plan to clad, subtract openings, then divide to get the panel count. The same method works for any panel size, so you can order with confidence rather than by eye. 

## Measure the wall area first 

Wall area is the starting number for every panel count, so measure each wall you plan to cover. Multiply the height by the width of each section and add the sections together. Subtract the area of doors, windows and any tiling you are keeping. Note the result in square feet or square meters and keep the figures written down. 

## Read the coverage on the panel 

Panel coverage is the flat area one board covers, and it is printed on the product information. A panel sold by its width and height gives coverage when you multiply those two dimensions. Divide your total wall area by the coverage of one panel to get a base count. Round up to a whole panel, because a part panel still has to be bought whole. 

## Add an allowance for cuts 

Cutting around corners, sockets and shower valves uses more material than a flat wall suggests. Add extra panels to the base count to cover offcuts and mistakes, with more spare where the layout has many corners. Keep one panel aside for later repair of a damaged section. Ordering the full allowance in one go keeps the panels from the same batch. 

## Questions about wet wall panel counts 

### Do I count the area behind the bath or shower? 

Yes, you count the wall area behind the bath or shower, because wet wall panels cover that surface. Measure the full height of the wall you are cladding, not just the tiled zone. Treat the bath or shower as part of the wall area and subtract only openings such as windows and doors. 

### How do I work out the panel count for a corner wall? 

A corner wall needs its two faces measured separately, then added together as one wall area. Multiply the height by the width of each face and sum the results before dividing by panel coverage. Corners create offcuts, so the cutting allowance matters more on an L-shaped layout. Buy the extra panel rather than risk a shortfall. 

### Should I buy extra panels for waste? 

Yes, you should buy extra panels for waste, offcuts and future repair. A plain flat wall needs a smaller allowance than a wall with many corners, pipes or sockets. Keep at least one full spare panel from the same batch, since color and pattern can vary between production runs. The exact spare amount depends on the complexity of your layout. 

### Can I use the same method for bathroom wall panels of any size? 

Yes, the same method works for bathroom wall panels of any size, because the calculation depends on coverage rather than the brand. Find the coverage of the panel you plan to buy and divide your wall area by it. Round up and add your cutting allowance. Confirm the coverage figure on the product information before ordering.
