# Fixing Overheating in an Enclosed Corner Cabinet

Learn why an enclosed corner cabinet gets hot and how to fix it with airflow, vent grilles, clearance from walls, and sensible placement of heat sources.

Fixing overheating in an enclosed corner cabinet means removing the heat that builds up inside it and giving that heat a path out. An enclosed corner cabinet traps warm air from electronics, LED drivers and lights because it has little airflow and sits against two walls. The fix combines fewer heat sources, open vent holes or grilles, clearance from walls and back panels, and a fan or passive airflow path. This page explains each step so you can cool the cabinet without guessing. 

## Find the heat sources first 

List every heat source inside the cabinet before you cut or drill anything. Electronics, power supplies, LED drivers and light fittings all release heat, and a driver running warm adds to the load. Touch each item after it has run a while and note which feel hot. Moving a driver outside the cabinet or onto a metal surface can lower the heat inside more than extra vents alone. 

## Plan vent openings for airflow 

Airflow in a closed cabinet needs an inlet low down and an outlet high up. Cool air enters near the bottom, warms as it rises, and leaves through the top vent. Cabinet ventilation grilles keep fingers and objects out while letting air pass, so fit them over any cut opening. Make the outlet larger than the inlet, and keep both openings clear of shelves, boxes and cable bundles. 

## Add a fan or keep it passive 

A passive airflow path works when the heat load is small and the vents are generous. A fan or passive airflow choice depends on how much heat the electronics and LED drivers produce inside the enclosure. A small fan at the outlet pulls warm air out and speeds the exchange, but it needs a power source and must not block the grille. Leave clearance from walls and the back panel so the cabinet can shed heat on all sides. 

## Questions about corner cabinet cooling 

### Why is my enclosed corner cabinet getting hot? 

An enclosed corner cabinet gets hot because heat from electronics, LED drivers and lights has no way out. The corner position adds walls on two sides, which reduces the surface that can shed heat. Warm air collects near the top, and the cabinet interior climbs above room temperature. Adding vent openings and clearance from the walls gives that heat a path away. 

### What ventilation does a corner electronics cabinet need? 

A corner electronics cabinet needs an inlet low and an outlet high so warm air can rise and leave. Ventilation for a corner electronics cabinet also needs clearance from the two walls and the back panel. Grilles over the openings keep objects out while air passes. Where the heat load is high, a fan at the outlet helps move the air. 

### Does an LED driver get too hot inside an enclosed cabinet? 

An LED driver can overheat in an enclosed cabinet when its heat has nowhere to go. The LED driver temperature rises with its own output and with the air around it, so a warm cabinet makes the driver run hotter. Fit the driver to a metal surface that acts as a heat sink and let air pass over it. Keep the driver away from other heat sources inside the cabinet. 

### How do I stop heat build-up from lights in an alcove? 

Lighting heat build-up in an enclosed alcove falls when you vent the space and separate the lights from other heat sources. Fit lights to a surface that can absorb heat and leave a gap so air moves around them. Add vent holes or grilles at the top of the alcove for warm air to escape. Choose fittings rated for enclosed spaces, because a fitting made for open air runs hotter when boxed in.
