# Fix a Wobbly Table

Find why a table wobbles, how to tighten loose leg bolts and brackets, and how to level uneven legs with shims or adjustable glides on any floor.

To fix a wobbly table, first find whether the joints are loose or the legs or floor are uneven. A loose joint moves when you push the tabletop sideways, while an uneven leg rocks from corner to corner. Tightening table bolts cures the first problem, and shimming or adjusting a leg cures the second. Many tables need both repairs, with tightening done before any leveling work. 

## Tighten leg bolts and corner brackets 

Loose leg bolts and tabletop fasteners make a table sway even on a perfectly flat floor. Turn the table upside down on a blanket to reach the hardware underneath. Check each leg bracket where it meets the table apron, the wooden frame below the top. Tighten each bolt firmly but stop before the wood around it starts to crush or crack. 

## Level uneven legs with shims or glides 

Uneven table legs or an uneven floor make a table rock even when every joint is tight. Shimming means slipping a thin wedge of wood, cork or felt under the short leg. Adjustable glides, small screw-in feet on the leg ends, allow finer table leveling without loose pieces. Place a level on the tabletop and adjust one leg at a time until the bubble centers. 

## When a wobbly dining table needs repair 

A wobbly dining table that stays loose after tightening often has a damaged joint or stripped hole. Glued joints, where a peg on the leg fits a slot in the apron, can dry and separate. Regluing such joints needs clamps plus a glue suited to the wood and finish. For antiques or heavy pieces, a trained furniture repairer can rebuild the joint without harming the finish. 

## Questions about fixing table wobble 

### Why does my table wobble in one spot but not another? 

A table that wobbles in one spot but not another is reacting to an uneven floor, not a loose leg. Tile grout lines, warped boards and sloped slabs can leave one leg slightly short. Moving or turning the table a little often finds a steadier position before any shimming. 

### How do I fix wobbly table legs that move at the joint? 

Wobbly table legs that move at the joint need tighter hardware, not a shim under the foot. A hanger bolt, a screw threaded on both ends, often joins a leg to a corner bracket. Tighten the nut on that bolt or the bracket screws until the leg stops moving. If the bolt spins without biting, the wood thread is stripped and needs a repair first. 

### Do folded paper or cardboard shims work under a table leg? 

Folded paper and cardboard can steady a table leg for a short time, but they compress. Cork, felt, wood or plastic wedges hold their thickness better and grip the floor more evenly. Trim any visible edge so the shim does not catch a foot or a mop. 

### Is a wobbly table a safety risk? 

Yes, a wobbly table can tip or drop hot dishes, especially when someone leans on it. Table stability matters more for tall, narrow or pedestal tables, which have less base to resist tipping. A cracked leg, split base or broken bracket calls for repair or replacement rather than tightening.
