# Dimension Constraints in CAD Drawing: Basics

Learn how dimension constraints control measurements in CAD sketches, the difference between driving and reference dimensions, and what a fully constrained sketch means.

Dimension constraints in CAD drawing are rules that fix the size of geometry, so a line stays at the length you set instead of drifting when the sketch is edited. A dimension constraint ties a value to a feature and lets the constraint solver recalculate the rest of the sketch around it. This page explains how dimensional constraints differ from geometric ones, how driving and reference dimensions behave, and what it takes to make a sketch fully constrained. 

## Driving dimensions set the geometry 

A driving dimension controls the geometry and takes part in solving the sketch. When you change its value, the solver moves the related features to match the new measurement. AutoCAD parametric dimensions used as driving dimensions lock a width, a radius or an angle to one value. A dimension that is meant to control geometry must be driving, or edits will move the feature away from your figure. 

## Reference dimensions only report a value 

A reference dimension measures geometry without controlling it and stays out of the solve. The solver reads the value from the drawing, so changing the reference number does nothing to the shapes. Reference dimensions suit a measurement you want to display but let other constraints decide. Mixing a reference dimension with a driving one on the same feature over-defines the sketch and the solver reports a conflict. 

## Fully constrained sketches hold their shape 

A sketch is fully constrained when geometric constraints and dimension constraints together leave no freedom of movement. The solver still needs enough information to place every point, so a fixed length alone may leave a line free to slide. CAD sketch constraints such as horizontal, vertical, tangent and coincident remove that remaining freedom. A sketch reported as fully constrained will hold its shape when you drag a point, which keeps measurements accurate through later edits. 

## Questions About CAD Dimension Constraints 

### What are dimension constraints in CAD drawing? 

Dimension constraints are rules that set the size of sketch geometry to a fixed value. They work with geometric constraints as part of a parametric system, and the constraint solver uses them to position the sketch. A dimension constraint on a line length or a circle diameter keeps that measurement steady when other parts of the drawing change. 

### What is the difference between dimensional and geometric constraints? 

Dimensional constraints set a numeric size such as a length, radius or angle. Geometric constraints set a relationship such as parallel, perpendicular or tangent without a number. Both feed the constraint solver together, and a well-built sketch uses dimensional constraints for sizes and geometric constraints for alignment. 

### How do driving and reference dimensions differ? 

A driving dimension controls the geometry and changes the sketch when you edit its value. A reference dimension only reports what it measures and cannot push the geometry to a new size. Use driving dimensions for sizes you want to control and reference dimensions for values you want to display. 

### What does it mean when a sketch is fully constrained? 

A fully constrained sketch has no remaining freedom to move, because the constraints and dimensions together fix every point. The solver confirms this state in the drawing, and the sketch keeps its shape when edited. Adding another dimension to a fully constrained sketch over-defines it, so the solver reports a conflict instead of accepting the value.
