# Connect a Smart Plug to Amazon Alexa

Learn how to connect a smart plug to Amazon Alexa, from enabling the skill and linking your account to running device discovery and fixing failed pairings.

You connect a smart plug to Amazon Alexa by enabling the plug maker's skill in the Alexa app, linking your plug account, and then running device discovery so the plug appears in your device list. The plug itself joins your home Wi-Fi first through its own app, and Alexa only finds it after that step is finished. When discovery fails, the cause sits in the account link, the Wi-Fi network, or the plug's model of pairing. 

- Set up the smart plug in its own app and confirm it responds before you open Alexa.
- Enable the plug brand's skill in the Alexa app, then link the same account you used in the plug app.
- Run device discovery from the Alexa app so the plug is added to your smart home list.
- Keep the phone and the Echo on the same Wi-Fi network the plug uses during setup.
- Re-link the skill or restart discovery when a plug that worked before stops responding.
 

## Set up the smart plug in its own app first 

A smart plug must be joined to your home Wi-Fi network in its own app before Alexa can see it. The plug app stores the network name and password and gives the plug a network identity. Alexa does not perform that first join. 

Plug the device into an outlet within reach of your router and open the plug maker's app. Follow the app's add-device flow and let it scan for the plug over Bluetooth or a temporary hotspot. Name the plug for the room it serves, because that name carries over into Alexa. 

Test the plug in its own app before you move on. Toggle the outlet on and off and confirm the lamp or appliance reacts. A plug that fails here cannot be fixed inside Alexa, so resolve the Wi-Fi join first. 

- Open the plug maker's app and create an account or sign in.
- Put the plug in pairing mode as the app instructs.
- Enter the Wi-Fi network name and password for the 2.4 GHz band.
- Wait for the app to confirm the plug is online.
- Rename the plug for its room and test the on and off control.
 

## Enable the Alexa skill and link your account 

Alexa reaches a third-party smart plug through a skill, which is the integration that connects your plug account to your Amazon account. Open the Alexa app, go to the skills section, and search for the plug maker's name. Enable the skill and sign in with the same credentials you used in the plug app. 

Account linking is the step that authorizes Alexa to read and control the devices on your plug account. The sign-in screen belongs to the plug maker, so the email and password must match that account rather than your Amazon login. A mismatched account is the reason a plug stays invisible after a successful skill install. 

Some plug makers use a different route and expose their devices through the Works with Alexa program or a Matter pairing code. Check the plug's packaging or app for which method applies, and follow that one method only so you do not create a duplicate entry. 
| Setup route | Where it starts | What it needs | 
| Brand skill | Alexa app skills section | Plug maker account login | 
| Works with Alexa certification | Plug app or Alexa app | Certified plug model | 
| Matter pairing code | Alexa app add device | Printed code on the plug |  

## Run device discovery in the Alexa app 

Device discovery is the scan in which Alexa asks a linked skill for the list of devices on your account. Open the devices section of the Alexa app, choose the add option, and select the plug brand or the other category. Alexa then contacts the skill and pulls the plug into your device list. 

Discovery can take a short while to finish, and the app shows a progress state while it runs. Keep the phone on the same Wi-Fi network as the plug and the Echo during the scan. If the plug does not appear, run discovery a second time before you change anything else. 

After the plug is listed, assign it to a room and give it a spoken name you can say easily. Alexa uses that name for voice commands, so a name like desk lamp works better than a long model string. Test the plug by voice once it sits in the device list. 

## Check the network both devices share 

A smart plug and the Echo that controls it must reach each other over the same local network for commands to act quickly. Many plugs connect only to the 2.4 GHz Wi-Fi band and do not see a 5 GHz network. Confirm the band your plug joined in its own app settings. 

Guest networks and network isolation settings block the traffic between the plug and the Echo. If your router separates guest devices from the main network, move the plug to the main network. A phone on mobile data during setup also breaks discovery, so switch it to Wi-Fi. 

Router security features that filter new devices can hold a plug offline even after a correct setup. Check the router's connected device list for the plug and allow it if the router marks it as blocked. Change router settings only if you understand them, and ask the router maker's support when unsure. 

## Fix a smart plug that will not connect to Alexa 

A smart plug not connecting to Alexa almost always traces to one of three causes: a broken account link, a Wi-Fi mismatch, or a plug that dropped off the network. Work through these in order and retest after each change. Each fix is quick and does not need special tools. 

Disable the skill and enable it again to refresh the account link, then rerun discovery. Power-cycle the plug by unplugging it for a moment and plugging it back in. Confirm the plug still responds in its own app before you blame Alexa. 

If the plug works in its app but not in Alexa, the skill link is the suspect. If it fails in both places, the Wi-Fi join is the suspect. Rename the plug in the plug app and rediscover it when the old entry is stale. 

- Disable and re-enable the plug skill in the Alexa app.
- Sign out and back in to refresh the account link.
- Unplug the smart plug and plug it in again.
- Test the plug in its own app to confirm it is online.
- Run device discovery again and check the device list.
 

## Use Echo pairing for plugs with Bluetooth setup 

Some smart plugs pair through a nearby Echo speaker instead of the phone alone. Echo device pairing lets the speaker pass Wi-Fi details to the plug over Bluetooth during setup. The Alexa app guides this flow when the plug model supports it. 

Keep the Echo powered on and connected to the target Wi-Fi network before you start. Place the plug close to the Echo for the pairing window, then move it to its final outlet once setup completes. The phone must stay in the Alexa app until the flow confirms success. 

Bluetooth pairing depends on the plug model, so check the maker's setup instructions for your exact device. A plug without Bluetooth support uses the standard skill route instead. Mixing the two approaches creates duplicate devices in the Alexa list. 

## Keep the plug working after setup 

A plug that worked before and now shows offline has lost its network connection or its account link. Check the plug in its own app first, then refresh the skill in Alexa. Most dropouts clear after a power cycle and a new discovery run. 

Firmware updates for the plug arrive through the plug maker's app, not through Alexa. Install them there so the plug keeps working with the skill. Keep the plug app installed on your phone for these updates and for re-linking. 

Give each plug a clear spoken name and a room so voice commands stay unambiguous. Review the device list now and then and remove entries for plugs you no longer use. A tidy list makes discovery faster and prevents Alexa from acting on the wrong device. 

## Smart plug and Alexa setup questions 

### Why is my smart plug not connecting to Alexa? 

A smart plug not connecting to Alexa is caused by a failed account link, a Wi-Fi mismatch, or a plug that is offline. Check that the plug responds in its own app first. Then disable and re-enable the skill and run device discovery again. 

### Do I need the plug maker's app if I use Alexa? 

Yes, you need the plug maker's app for the first setup and for firmware updates. The app joins the plug to your Wi-Fi network and creates the account that Alexa links to. Alexa alone cannot put a new plug on your network. 

### What is Alexa skill linking for a smart plug? 

Alexa skill linking is the sign-in step that connects your plug maker account to your Amazon account. Enable the brand skill in the Alexa app and enter the same credentials you used in the plug app. A mismatched login keeps the plug out of your device list. 

### How do I get Alexa to find my smart plug after setup? 

Run device discovery from the devices section of the Alexa app and pick the plug brand. Keep the phone and the Echo on the same Wi-Fi network during the scan. If the plug does not appear, run discovery once more before changing settings. 

### Does the Echo need to be on the same Wi-Fi as the smart plug? 

Yes, the Echo and the smart plug should share the same local network for reliable control. Many plugs connect only to the 2.4 GHz band, so check which band the plug joined. Guest networks that isolate devices block communication between the plug and the Echo. 

### Can I connect a smart plug to Alexa without a brand skill? 

A smart plug can connect without a separate brand skill when it carries Works with Alexa certification or supports Matter. Both routes still begin with the plug on your Wi-Fi network. Check the packaging or the plug app for which method your model uses.
