# Boxes of Tile for a Shower

Work out how many boxes of tile a shower needs by measuring the wall area, reading the coverage on each box, and adding a waste allowance.

To find how many boxes of tile for a shower you need, divide the total wall tile area by the coverage printed on each box, then add a waste allowance. The wall area is the sum of each tiled surface measured in square feet. Round the result up, because tile is sold in full boxes. 

- Measure each tiled wall as height times width and add the surfaces together.
- Divide the shower wall tile area by the coverage per box printed on the label.
- Add a waste allowance for cuts, corners and breakage before rounding up.
- Buy a spare box from the same batch to cover future repairs.
 

## Start with the tiled wall area 

The shower wall tile area is the number that drives every later decision. Measure each wall you plan to tile from the floor or tub edge to the height you want, then multiply height by width. 

Add the figures for all tiled walls to get one total in square feet. Subtract openings such as a window or a recessed niche only if you will not tile across them. 

Write the total down before you shop, because the number on the box is coverage, not wall size. A clear figure keeps the estimate honest and easy to check later. 

## Read the coverage per box 

Tile coverage per box is printed on the carton and tells you the area one box will finish. Coverage changes with tile size and thickness, so two boxes of different tile rarely cover the same area. 

Check the label rather than guessing from the tile count inside. A box of large tiles and a box of small tiles can hold very different square footage. 

Divide your wall total by the coverage figure to get a base number of boxes. Keep the label until the job is finished in case you need to match the batch. 

## Add a waste allowance for cuts 

A waste allowance for shower tile covers cuts at corners, edges and around fixtures. Shower walls carry many cuts, so the allowance matters more here than on a plain floor. 

Add a share of the wall area on top of the measured total before dividing by coverage. The share depends on tile size, the pattern and how many corners the walls have. 

Small tiles and diagonal or stacked patterns create more offcuts than large tiles laid in a simple grid. Raise the allowance when the layout is fussy and lower it when it is plain. 
| Layout factor | Effect on waste | 
| Large tile, straight grid | Lower allowance | 
| Small tile or mosaic | Higher allowance | 
| Diagonal or herringbone pattern | Higher allowance | 
| Many corners, niches and edges | Higher allowance |  

## Turn the total into boxes per shower 

Tile boxes per shower come from dividing the wall area plus allowance by the coverage on one box. The answer is rarely a whole number, so round up to the next box. 

Rounding up leaves you short of nothing and gives spare pieces for a repair later. A part box left over is worth storing flat in a dry place with the label attached. 

If the sum lands close to a whole box, buy the extra box anyway. Running out mid-wall means a second order, and a second order may come from a different batch. 

## Measure around a tub or a corner 

A shower over a tub and a corner shower each change how you measure the walls. For a tub surround, measure from the tub deck upward, not from the floor. 

A corner shower has two or three tiled walls that meet at inside corners. Measure each face separately, then add them, because the corner itself eats tile during cutting. 

Note the position of the valve, shower head and any niche before you order. These openings reduce the tiled area slightly but add cuts around their edges. 

## Order the tile in one batch 

Ordering all boxes at once keeps the tile in a single batch with a consistent shade and caliber. Shade and caliber are printed on the box and can differ between production runs. 

Check the batch code on every carton when the delivery arrives. Mixed batches can show a visible tone shift across a wall, which is hard to correct after the tile is set. 

Store the boxes flat and dry until the tiling starts. Keep two or three pieces aside once the job ends for any future repair. 

## Plan the layout before buying 

A simple layout plan can reduce the number of boxes you need to open. Sketch the walls, mark the tile size and decide where full tiles and cut tiles will fall. 

Centering the layout on a wall or on the shower valve balances the cut pieces at both ends. Balanced cuts look deliberate and often use the tile more evenly. 

Setting tile on a shower wall involves waterproofing and heavy materials, so a trained tile setter should handle the installation. The measurement work is yours to prepare. 

## Questions About Shower Tile Boxes 

### How many boxes of tile do I need for a shower? 

The number of boxes equals the shower wall tile area plus a waste allowance, divided by the coverage per box. Measure each tiled wall, add them, then divide and round up. No single number fits every shower because wall size and box coverage vary. 

### Should I add extra tile for cuts and corners? 

Yes, a waste allowance for shower tile should be added before you divide by coverage. Corners, niches and fixture openings all create offcuts. The size of the allowance depends on tile size and pattern rather than on a fixed rule. 

### What is tile coverage per box? 

Tile coverage per box is the square footage one carton will finish, printed on the label. It depends on tile size and thickness, so read each label. Dividing your wall area by this figure gives the base box count. 

### Can I buy the tile in two separate orders? 

Buying shower tile in one order is safer because shade and caliber can change between batches. A second order may arrive with a slightly different tone. If you must split the order, check the batch codes match. 

### Does a tub surround change the measurement? 

Yes, a tub surround is measured from the tub deck upward rather than from the floor. The tiled height is shorter, so the wall tile area is smaller. Measure each wall face separately and add the results.
